gunoil
07-04-2012, 11:08 AM
perfection on brass
brass punch thru die
9 mm brass; Perfection..
i bought a custom "makarov" 9mm crimp die today to go in my lee buldge buster kit. (take crimp (guts) out of makarov die and screw into single stage press, brass goes thru totally into a LEE cup on top of single stage press. *A vertical punch goes in shell holder and pushes the 9mm brass all the way thru so there is no buldge. And ofcourse with 40 cal die you can do same thing..
yea, ran another 100 thru DB-9, mixed bullets, setting here now loading buddys stuff again. Just think, i have a whole 6 cav mold set @124grn (&LEE-sizerlube kit too!) round nose. I love round nose. feeds better. I wish .355 would go thru barrel but those loading guys say .356 for lead. .355 makes a beautiful round especially if ya crimp it. I crimp all my 380's.
With 9mm swaged thru die punch (LEE buldge buster kit) ,,its great brass.
-------------------------------------
i have been crimping 380 copper plated for months. I just crimped some copper plated 9's, and the 9's with lead bullets (lead in brass crimped tighter) which really did a nice job. really nice!
*Size with fill length size die is not full length ... To me full length sizing is all the way thru and out the top.
So i am glad i bought full length buldge buster kit (LEE) which sizes whole piece of brass top to bottom. Now what i just learned ,(crimping added a plus to the push thru size die w/punch) about the 9mm's brass is it will have a chance to run perfect. When i size with what we think is full sizing die we will never have a chance to have perfect round because *(without thru punch) when i sized 9mm's, they all feel different at bottom of lever..With thru punch *from LEE, brass will all be true cause all brass pops out the top in LEE cup provided.
brass punch thru die
9 mm brass; Perfection..
i bought a custom "makarov" 9mm crimp die today to go in my lee buldge buster kit. (take crimp (guts) out of makarov die and screw into single stage press, brass goes thru totally into a LEE cup on top of single stage press. *A vertical punch goes in shell holder and pushes the 9mm brass all the way thru so there is no buldge. And ofcourse with 40 cal die you can do same thing..
yea, ran another 100 thru DB-9, mixed bullets, setting here now loading buddys stuff again. Just think, i have a whole 6 cav mold set @124grn (&LEE-sizerlube kit too!) round nose. I love round nose. feeds better. I wish .355 would go thru barrel but those loading guys say .356 for lead. .355 makes a beautiful round especially if ya crimp it. I crimp all my 380's.
With 9mm swaged thru die punch (LEE buldge buster kit) ,,its great brass.
-------------------------------------
i have been crimping 380 copper plated for months. I just crimped some copper plated 9's, and the 9's with lead bullets (lead in brass crimped tighter) which really did a nice job. really nice!
*Size with fill length size die is not full length ... To me full length sizing is all the way thru and out the top.
So i am glad i bought full length buldge buster kit (LEE) which sizes whole piece of brass top to bottom. Now what i just learned ,(crimping added a plus to the push thru size die w/punch) about the 9mm's brass is it will have a chance to run perfect. When i size with what we think is full sizing die we will never have a chance to have perfect round because *(without thru punch) when i sized 9mm's, they all feel different at bottom of lever..With thru punch *from LEE, brass will all be true cause all brass pops out the top in LEE cup provided.