Hard Brake Down

[joatmon]

Any good directions on the net that explane lighting the brake down of the barrels on a stevens 311. [smilie=b:

Thanks Aaron

[oneokie]

Do these barrels have an extractor or ejectors?
If ejectors, search for a schematic of the barrels for a Fox Model B. Same thing.

[joatmon]

Extractor

Thanks Aaron

[oneokie]

Think I misunderstood your OP. Are you asking how to lessen the amount of effort needed to break open the sg after firing?

[joatmon]

Yes! I'd like to use the gun for sass but the effort to breake down for reloading is HUGE!!!

Aaron

[rbertalotto]

If you go to the SASS forum or the CAS forum and search Savage or Stevens 311 lots will turn up.

A spring kit from brownells and a few curse words as you attempt to install it will be needed.......And after it is all said and done, sell it and get a Stoeger

[oneokie]

One has to replace the hammer springs with lighter springs. Look in a good firearms disassembly manual for the procedure.