doubledown
06-30-2012, 11:49 AM
I was looking for a plinking load for my 500 Jeffery:-P I Emailed Tom at Accurate Mold and asked for a 700 grain tumble lube WFNGC in an aluminum mold. The mold is beautiful, its a three banger with the trough sprue plate, and casts beautiful boolits.
I am using WW with 2% tin added and 45/45/10 and load them down to 1950 fps. They are hunting accurate, and don't lead my barrel. I know I am pushing the limits of tumble lube, but took a chance and so far so good.
http://i476.photobucket.com/albums/rr130/doudledown/b1c9ffb8.jpg
The Boolit went 18" in wet news paper, and the recovered weight was 683 grains, expanded diameter was 1.076
I am using WW with 2% tin added and 45/45/10 and load them down to 1950 fps. They are hunting accurate, and don't lead my barrel. I know I am pushing the limits of tumble lube, but took a chance and so far so good.
http://i476.photobucket.com/albums/rr130/doudledown/b1c9ffb8.jpg
The Boolit went 18" in wet news paper, and the recovered weight was 683 grains, expanded diameter was 1.076