475/480
04-23-2007, 10:25 AM
My first attemp at Beagling and everything worked fine.I just happen to have a new roll of AC Aluminum tape in the garage,so I put 1 strip of tape under the cavities the full length of the mould and 2 small squares in each corner of the mould were the pins are and the diameter went from .430 to .432-.436 with as you can tell some out of roundness,but this was easily corrected with lube/sizing.
All in all everything worked good.
I have a MM mould that needs to be increased so I know what mould is next :D:
Sean
All in all everything worked good.
I have a MM mould that needs to be increased so I know what mould is next :D:
Sean