.400 Mold Needed circa 250gr

[vh2q]

Have a H&H in 450/400BPE that has a .407" groove at the breech end and was originally made to shoot a paper patch bullet "399 bore" according to H&H. The bore may taper some, haven't checked that. Want to shoot grease groove 250 or 275 grainers ... any molds out there in this dia/weight? Cursory search turns up none. Would appreciate a lead, or a mold if someone has one that will work. Gas Check may be a good idea as this caliber goes to circa 1700fps. Also going to need a lubesizer die in .407-8. Email me as I don't visit too often. PS I won't buy from NEI, the guy running it is a prime #)#clown.russ@canby.com

[runfiverun]

try noe sight vendor here [not nei can't believe they are still in business] they have a 250ish 410 diameter gas check mold.
http://noebulletmolds.com/orders/catalog/index.php?cPath=40&osCsid=509lkv5cvicfpb3qf5ubruhg57
look here.

[Moonie]

I'd also check with Accurate Molds, if they don't have it they will work with you to design what you want/need and make it for you.