View Full Version : 32-40 Crimp Die for 32 WS ?
superbee
05-31-2012, 05:10 PM
Will a Lee factory crimp die work for 32 Winchester Special cartridges?
I got a 300 Savage round thoroughly stuck in a 30-30 factory crimp die, so I am a little leery about die compatibility with different chamberings :x.
r1kk1
06-01-2012, 03:47 PM
You will have to try it. I use a CH taper crimp die for the 32 WS, not the scenario you stated but it wouldn't hurt to try. Not the answer your looking for but I think it would work.
take care
r1kk1
Clark
06-02-2012, 11:56 PM
I crimp 32 S&W long brass in a 308 factory crimp die.
I put the cartridge in upside down with a spacer and a sawed off 308 case in the bottom.
Here is a 3 minute video
http://www.youtube.com/watch?v=NE2aVfWJIKc
I got 1413 fps with an 85 gr bullet.
That is 327 Federal country.
superbee
06-04-2012, 11:35 AM
Well now, that is pretty clever !
r1kk1
06-07-2012, 01:31 PM
I use a shortned 30 Carbine die for 327 Federal Magnum. It started life as a CH4D die.
take care, r1kk1
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.