PDA

View Full Version : Feeding Issues 45 acp and 357 mag



Wilsknife
05-22-2012, 12:48 AM
I have some 45acp Truncated cone cartridges that don't like to feed in my Ruger P90, and some 357 mag 124 2 ogive cartridges that won't feed in my Rossi leveraction.
Any thoughts or suggestions?
I'm just trying to be safer than the average bear...

Could it be an incomplete crimp?
:bigsmyl2:
:cbpour:

tomme boy
05-22-2012, 01:16 AM
I remember the P90 I had was not picky. But others have had all kinds of problems with them if they had the 8 round mags. Mine did not have them. So it ran perfect. Do a search on here for the P90 and there is one post that covers it.

lavenatti
05-22-2012, 06:59 AM
Here's a good thread...

http://www.castboolits.gunloads.com/showthread.php?t=149960&highlight=p90

paul h
05-23-2012, 07:31 PM
On the ruger, it could be you need to seat the bullets a little deeper in the case. My P90 feeds great, but my first loads wouldn't completely chamber due to not being seated deeply enough.