10mmShooter
05-19-2012, 04:50 PM
I'already had one RCBS 44-250-K. I had ordered a new one about 6 months ago and just today got around to getting the pot out and trying it out with my existing mold.
It ran great with WW lead dropped at .430-.432 and at 255-260 grains, just like the old one. Only difference I can tell from my other RCBS molds is that they are using a bigger font on the mold lettering its much more pronuced and larger than my other RCBS molds.
It was a good day, good bases, nice fillout and a low reject rate. I was so happy I had to run a few through the sizer to check them out.
http://keithrussell.net/m1a_setup/4140.JPG
here was the setup for the day
http://keithrussell.net/m1a_setup/4139.JPG
It ran great with WW lead dropped at .430-.432 and at 255-260 grains, just like the old one. Only difference I can tell from my other RCBS molds is that they are using a bigger font on the mold lettering its much more pronuced and larger than my other RCBS molds.
It was a good day, good bases, nice fillout and a low reject rate. I was so happy I had to run a few through the sizer to check them out.
http://keithrussell.net/m1a_setup/4140.JPG
here was the setup for the day
http://keithrussell.net/m1a_setup/4139.JPG