Just Duke
05-11-2012, 10:02 AM
This would be for a Marlin 1894 44 Magnum, Winchester or S&W. Also could be made 300 grains.
http://i921.photobucket.com/albums/ad54/LEVERACTIONSHOOTERS/82156.jpg
https://shop.rcbs.com/WebConnect/MainServlet?storeId=webconnect&catalogId=webconnect&langId=en_US&action=ProductDisplay&screenlabel=index&productId=3383&route=C12J059
Seems as though the RCBS mould drop small
It is close to being right but in my experience it is hard to get an RCBS mold the right diameter, most are under size. Mine drops .429" as does my 245 RCBS. It is a matter of luck to get a mold cut with a new cherry. Same as my 500 gr RCBS BPCR boolit that dropped at .457".
We use .431" in the .44.
But then you should show us what the boolit does by posting some pictures. That is the best way for a new fella to make a decision.
http://i921.photobucket.com/albums/ad54/LEVERACTIONSHOOTERS/82156.jpg
https://shop.rcbs.com/WebConnect/MainServlet?storeId=webconnect&catalogId=webconnect&langId=en_US&action=ProductDisplay&screenlabel=index&productId=3383&route=C12J059
Seems as though the RCBS mould drop small
It is close to being right but in my experience it is hard to get an RCBS mold the right diameter, most are under size. Mine drops .429" as does my 245 RCBS. It is a matter of luck to get a mold cut with a new cherry. Same as my 500 gr RCBS BPCR boolit that dropped at .457".
We use .431" in the .44.
But then you should show us what the boolit does by posting some pictures. That is the best way for a new fella to make a decision.