View Full Version : Source for 410 hull's
Anybody?
I know there was a thread awhile ago about the subject.
kenyerian
05-05-2012, 09:09 AM
http://www.ballisticproducts.com/410-bore-hulls/products/199/ I've had good luck in the past ordering from these guys although it has been a while since I've ordered from them.
kenyerian
05-05-2012, 09:11 AM
http://www.midwayusa.com/Product/992132/bpi-multi-hull-shotshell-hulls-multi-hull-410-bore-3-primed-skived-red-bag-of-100 Midway has some also.
zuke,
I may have been the guy that started the old thread you are taliking about.
I ended up buying some Cheddite primed hulls form Graf & Sons. I checked around and prices were similar and their shipping is much lower. A big factor was that they are a sponsor on this site.
The Cheddite hulls were all I could find and they seem to be working out OK. We have loaded about 200 of these. The problem is that there is just not a whole lot of data out on these hulls. I ended up getting my recipes from
http://data.hodgdon.com/shotshell_load.asp
Good luck, jmsj
Thank's guy's,it's all coming together now.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.