Gerald C
05-02-2012, 05:14 PM
HI I don't post much but I thought you might be interested in this insert I made for my new 38-50 Rem Hepburn. It took me 2 years to make the rifle. I got it shooting and I planed on using it at Alliance this May shoot but my wife became ill and so I had to make other plans. So I looked up to see if anybody made a 22 insert for a 375 cal.bpcr.
I couldn't fine any so that got me to thinking how to do it. I found that Mid Way has barrel liners and they have one that's 5/16 in dia. for under $40. so heres is what I came up with and how it's shooting.
http://castboolits.gunloads.com/imagehosting/thum_83344fa19d4e38f07.jpg (http://castboolits.gunloads.com/vbimghost.php?do=displayimg&imgid=5026)
http://castboolits.gunloads.com/imagehosting/thum_83344fa19d4eb62cd.jpg (http://castboolits.gunloads.com/vbimghost.php?do=displayimg&imgid=5027)
http://castboolits.gunloads.com/imagehosting/thum_83344fa19dbb5c9a0.jpg (http://castboolits.gunloads.com/vbimghost.php?do=displayimg&imgid=5029)
http://castboolits.gunloads.com/imagehosting/thum_83344fa19dbbd5ec4.jpg (http://castboolits.gunloads.com/vbimghost.php?do=displayimg&imgid=5030)
Don't pick on me for the finish on the brass this was a test not an end product .:lol:
Gerald C
I couldn't fine any so that got me to thinking how to do it. I found that Mid Way has barrel liners and they have one that's 5/16 in dia. for under $40. so heres is what I came up with and how it's shooting.
http://castboolits.gunloads.com/imagehosting/thum_83344fa19d4e38f07.jpg (http://castboolits.gunloads.com/vbimghost.php?do=displayimg&imgid=5026)
http://castboolits.gunloads.com/imagehosting/thum_83344fa19d4eb62cd.jpg (http://castboolits.gunloads.com/vbimghost.php?do=displayimg&imgid=5027)
http://castboolits.gunloads.com/imagehosting/thum_83344fa19dbb5c9a0.jpg (http://castboolits.gunloads.com/vbimghost.php?do=displayimg&imgid=5029)
http://castboolits.gunloads.com/imagehosting/thum_83344fa19dbbd5ec4.jpg (http://castboolits.gunloads.com/vbimghost.php?do=displayimg&imgid=5030)
Don't pick on me for the finish on the brass this was a test not an end product .:lol:
Gerald C