View Full Version : lyman 429106
downwind
04-28-2012, 07:00 PM
OK, I've done the search and read all posts that came up.
Can anyone give me more info on this mold and it's cast boolit?
A friend has just picked one up at an auction.
Can it be used in a 44WCF (44-40) or is the nose too long? Wouln't seem so.
Is the nose blunt enough to use in a lever guns tubular magazine?
It seems that people have unsucessfully searched for years for this mold, I may have to Beg, Borrow, or Steal for this mold just to own it, Of course I have it in my possesion for research purposes and I hear that possesion is 9/10 th of the law![smilie=w:
THANKS
DOWNWIND
I also searched for years and gave up !
Right before Bruce at BRP shut down he made me a custom 4-cavity duplicate with modified lube grooves!
Beautiful mold and outstanding target bullets for .44Special and .44 Russian! :) :)
Jerry
http://www.fototime.com/681BC62CC7CF140/standard.jpg
http://www.fototime.com/1B5EE8DA46E78E7/standard.jpg
dbldblu
04-28-2012, 07:41 PM
161 grain round nose according to a .pdf I have. The .pdf is too large or I would attach it. Here is a partial.
downwind
04-29-2012, 06:54 PM
I also searched for years and gave up !
Right before Bruce at BRP shut down he made me a custom 4-cavity duplicate with modified lube grooves!
Beautiful mold and outstanding target bullets for .44Special and .44 Russian! :) :)
Jerry
http://www.fototime.com/681BC62CC7CF140/standard.jpg
http://www.fototime.com/1B5EE8DA46E78E7/standard.jpg
Don't own a 44spl. (yet), but was hoping to try it in a 1892 44WCF
Thanks for the reply
DOWNWIND
downwind
04-29-2012, 06:55 PM
161 grain round nose according to a .pdf I have. The .pdf is too large or I would attach it. Here is a partial.
Thanks for the reply, I do have that same pdf
THANKS
DOWNWIND
DOWNWIND:
I can send a handfull if you are interested. What alloy do you prefer?
Jerry
downwind
04-29-2012, 08:16 PM
DOWNWIND:
I can send a handfull if you are interested. What alloy do you prefer?
Jerry
Thanks for the offer jerry , but as I have said; I am in possesion of the mold and have already made a deal on it- SHHHH - ($35) and cast about 150 bullets today
THANKS AGAIN
DOWNWIND
beagle
05-01-2012, 11:55 AM
#2 son has one and I cast a few and loaded them in the .44 Mag.
429106 175.2 grains 2400 12.5 gr 854 FPS 14.2 SD
Now, I didn't dwell on this bullet as it wasn't my mould. With this load, ignition was poor and as a result accuracy was too. Powder was too slow.
With some WW231 in either the .44 Special or .44 Mag it should do all right for a light bullet./beagle
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.