Lead fouling?

[Fly]

Got back from a 4 day black powder shoot.We shot a lot of pistols.I cleaned
my guns up at the shoot every day, but not the clean up to put away kinda
deal.

Well today I'm doing the big clean.But I find I'm getting a little lead fouling
at the base of the barrel, where the balls enter from the cylinder.Any good
lead fouling stuff I can use to remove this?

Fly:lovebooli

[Maven]

Fly, Ed's Red, Kroil, Marvel Mystery Oil, WD-40, etc. on a bore brush or tight patch will work, but so will any of these on a Chore Boy copper pad (Make sure it's really Cu!) cut apart and wrapped around a bore brush. Bronze wool is good too if you can get it.

[Beagle333]

Chore Boy copper pad

+1 It takes it right out.

[Fly]

What may I ask is a chore boy copper pad?????

Fly

[just.don]

http://choreboyscrubbers.com/

[Beagle333]

amazon.com has em for about $2 each, or $1 if you want 36 of em.

Be sure it's the copper scrubbers.

[Fly]

Thanks guys, maybe my suppermarket has them.

Fly