rbertalotto
04-22-2012, 04:47 PM
I finally got around to sending the camera down the bore of the Winchester 1873 I pick up on Friday. Someone needs a good talking to about bore maintenance!!!
Just inside the muzzle:
http://images40.fotki.com/v1333/photos/2/36012/10611500/1873borescope001-vi.jpg
6" from Muzzle:
http://images42.fotki.com/v663/photos/2/36012/10611500/1873borescope002-vi.jpg
12" from Muzzle:
http://images112.fotki.com/v106/photos/2/36012/10611500/1873borescope003-vi.jpg
18" from Muzzle: (this is where the barrel was "ringed")
http://images56.fotki.com/v127/photos/2/36012/10611500/1873borescope004-vi.jpg
Beginning of chamber (Throat):
http://images9.fotki.com/v120/photos/2/36012/10611500/1873borescope006-vi.jpg
Neck Area:
http://images16.fotki.com/v382/photos/2/36012/10611500/1873borescope007-vi.jpg
Chamber:
http://images40.fotki.com/v1333/photos/2/36012/10611500/1873borescope008-vi.jpg
I'll post up some pictures of a good barrel so you can compare.
These pictures were taken with a $34 bore scope a few of us gun nuts bought on Ebay from Hong Kong. For the $$, it works pretty good....
Just inside the muzzle:
http://images40.fotki.com/v1333/photos/2/36012/10611500/1873borescope001-vi.jpg
6" from Muzzle:
http://images42.fotki.com/v663/photos/2/36012/10611500/1873borescope002-vi.jpg
12" from Muzzle:
http://images112.fotki.com/v106/photos/2/36012/10611500/1873borescope003-vi.jpg
18" from Muzzle: (this is where the barrel was "ringed")
http://images56.fotki.com/v127/photos/2/36012/10611500/1873borescope004-vi.jpg
Beginning of chamber (Throat):
http://images9.fotki.com/v120/photos/2/36012/10611500/1873borescope006-vi.jpg
Neck Area:
http://images16.fotki.com/v382/photos/2/36012/10611500/1873borescope007-vi.jpg
Chamber:
http://images40.fotki.com/v1333/photos/2/36012/10611500/1873borescope008-vi.jpg
I'll post up some pictures of a good barrel so you can compare.
These pictures were taken with a $34 bore scope a few of us gun nuts bought on Ebay from Hong Kong. For the $$, it works pretty good....