View Full Version : 30 carbine
BBarrett
04-20-2012, 11:30 PM
Does anyone have a good load for the 30 carbine using 150 gr. GC bullet in a 10 in. barrel contender they would share?:cbpour:
Combat Diver
04-21-2012, 09:43 AM
Sorry I don't but I'm interested if someone else does also.
CD
bobthenailer
04-21-2012, 02:54 PM
I do but i will have to go to the archives to dig them out! give me a few days!
nighthunter
08-05-2013, 06:03 PM
Just today I tried 14.0 grains RL-7 with a 150 gr GC. Probably a 2 1/2 inch group at 100 yards with a scoped 10 inch barrel. Seating depth and COAL will depend on your particular bullet. Mine is from a long ago group buy with 3 crimp grooves. It might have been my first group buy mold. That was back when we were waiting almost a year for LEE. Sure have made an awful lot of good bullets with it though.
Nighthunter
hicard
08-05-2013, 08:16 PM
Give me an overall length. bullet length and powder you want to use and I should be able to come up with something for you.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.