View Full Version : Good 9mm auto mold
monge
04-19-2012, 09:51 PM
Whats a good mold to start off with in 9mm sw99 auto have not sluged barrel yet. Just trying to get some input? Thanks Joe
MtGun44
04-19-2012, 11:33 PM
Go to the Handgun section and read the sticky on "Setting up a new 9mm for
Boolits". It will save a lot of time.
Bill
SlowSmokeN
04-19-2012, 11:43 PM
Make sure you slug your barrel before buying a mold. I bought the LeeTL356-124RN and the boolit was to small. Ended up with the Lee TL358-125 and love it. The proper fit was key and I am able to shot without leading.
Rhino
04-20-2012, 12:45 AM
I use the Lee TL356-125TC - it works well, easy to cast in a six banger.
Also the LEE 358-105SWC sized down to 356 also shoots well - also leaves a cleaner cut in the target due to the more pronounced shoulder
Cheers
GREENCOUNTYPETE
04-20-2012, 11:23 AM
my 356-120TC drops .360 boolits , and they work for me
definitely slug your barrel , some older guns run down to bores of .354 while many newer guns come brand new with a .357 bore
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.