Lefever Nitro Help Please

[calkar]

I have put together a 12g lefever nitro from a basket case gun shop find and have discovered that I must be missing some hardware that holds the return spring for the barrel locking lever. I do have the spring, Can someone Please show me a drawing or schematic of the missing piece. If someone would have this part for sale that would be better yet. I have an old repro of a parts list and dont see a part for that hole in the first pic which engages the barrel lock. Thank You!

[scb]

As you are probably aware the LeFever Nitro was made by Ithaca Gun Company.
These are pictures of a Flues Model Ithaca Double. The parts you are looking for are, if not interchangeable, very, very similar.

http://i487.photobucket.com/albums/rr236/scb2008/002-1.jpg

http://i487.photobucket.com/albums/rr236/scb2008/004-1.jpg

[Just Duke]

You have my attention. :awesome:

[calkar]

Thanks scb holding the spring back while trying to thread that screw was almost as tough as setting the main springs. I have it up and running now ready for some cowboy shootin. Thank you