Jal5
04-12-2012, 05:21 PM
I had posted previously about trying to develop a boolit and load for my 32 pistols. I settled on a larger than normal, 100gr. boolit cast from range scrap + solder 2% using the Lee 311-100 mold and recluse lube.
http://www.castboolits.gunloads.com/showthread.php?t=147390&highlight=acp
Today I tried them over 1.0 and 1.1 gr of Bullseye in my Bayard pistol that is early 1900 vintage at 8yds. 1.1gr was pretty good, 5 of 8shots where within a little less than 2in. group with the others as flyers. I think I can do better than that with a little more practice using this load. Very light recoil and all rounds cycle at 1.1 so I am happy that I worked on this caliber. Thanks for the help.
:smile:
Joe
http://www.castboolits.gunloads.com/showthread.php?t=147390&highlight=acp
Today I tried them over 1.0 and 1.1 gr of Bullseye in my Bayard pistol that is early 1900 vintage at 8yds. 1.1gr was pretty good, 5 of 8shots where within a little less than 2in. group with the others as flyers. I think I can do better than that with a little more practice using this load. Very light recoil and all rounds cycle at 1.1 so I am happy that I worked on this caliber. Thanks for the help.
:smile:
Joe