another 20ga slug question

[hatcreek]

These shots were fired at 50yds bench rest, 20ga 870 rifled barrel, the rounds were a 44 cal bullet in a SPW in a Hornaday hull on top of 19 gr of WSF.
I do have a question, is there a mold out there that I can cast and load like a Lee keyway, it seems to me that i read somewhere that a .58cal, might work, this is for 20ga. Thanks:lovebooli43152

[SuperBlazingSabots]

Good morning HatCreek, plenty of choices in bullets and their weights:
http://www.midsouthshooterssupply.com/item.asp?sku=0000690404
http://www.midsouthshooterssupply.com/item.asp?sku=0000690475
http://www.midsouthshooterssupply.com/item.asp?sku=0000690476
http://www.midsouthshooterssupply.com/item.asp?sku=0000690478
http://www.midsouthshooterssupply.com/item.asp?sku=0000690481
http://www.midsouthshooterssupply.com/item.asp?sku=000152650213
http://www.midsouthshooterssupply.com/item.asp?sku=000152654120
http://www.midsouthshooterssupply.com/item.asp?sku=000152654213
http://www.midsouthshooterssupply.com/item.asp?sku=000152654494
http://www.midsouthshooterssupply.com/item.asp?sku=000152654622
http://www.midsouthshooterssupply.com/item.asp?sku=000152654675
Hope it helps.
Ajay
Video Memories
VdoMemorie-Blazing Sabots!
www.PreciousVideoMemories.com

[hatcreek]

Thanks Ajay, I will be interested in the slug you are working on sounds great, thanks again. Pat

[DODGEM250]

Here's my 20 gauge slug setup with a .58 Minie in a sabot. Less the felt filler wad. It is not necessary anymore. I use 26grains of HS-6 in my 20 gauge shells. The poly wad is a BPI Commander. I pack these in high-brass 20 gauge hulls. This is my reloading answer to the Remington BuckHammers I was using.