slant breech sharps

[oldgunbrit]

Gentlemen,

I'm looking for a mould for a 44cal slantbreech. My bore slugs to 0.417 to the bottom of the rifling. Is there a commercial mould available or do I need to get a custom mould made........not to many mould makers here in the UK .

All help appreciated, it's a fine old gun that's waiting to be shot !!

[shooter93]

You may be able to get one from Buffalo Arms if they ship to the UK. If not....Tom at Accurate Molds.....and welcome to the site.

[.22-10-45]

Hello, oldgunbrit..I happen to like old British Guns! You might want to check out NEI moulds.
Are you sure your groove dia. is .417"? That sounds small for a .44.

[oldgunbrit]

thanks for the info.......I'll give Buffalo a call with some bullet sizes, they list sharps molds on thier web site.

[oldgunbrit]

yeah, mis-measured the bore ! Checked out Buffalo's web site....... looks as though they can help.

On the range with my martini-henry this weekend !

[Freightman]

Pictures please!