value of lyman 45 lubesizer

[sealer]

everything is there but the lube reservoir wrench. has the non vented cap with a 311 r n top punch and a 357 sizer die. its in good shape, everything works perfect.
thanks, dennis

[DaveInFloweryBranchGA]

Replacement lube reservoir wrench: http://www.chapmanmfg.com/AboutChapmanTools.html

Are you buying or selling?

[sealer]

i'm going to sell this one. i have a rcbs lam 1 and a pitzer, i just don't need the lyman.
thanks, dennis

[Pressman]

Keep the Lyman, get rid of that old, dead horse Pitzer. Send it back to Iowa where it came from - me. :)
Ken

[sealer]

pressman,
ha ha you funny :mrgreen:
that pitzer is the trick.
thanks, dennis

[JonB_in_Glencoe]

everything is there but the lube reservoir wrench. has the non vented cap with a 311 r n top punch and a 357 sizer die. its in good shape, everything works perfect.
thanks, dennis

hmmm, no one has given you a value yet?

Condition is everything.
from the limited info and lack of photo,
I'd give you a value of around $50 for most any functional unit with a die.

It'd probably go for more depending on condition...
IE. if the slides and reservoir aren't too worn and has the pressure screw and Nut upgrade and has all the original screws and they aren't chewed up and the spring is still springy and the casting doesn't have a hairline crack by the Die setscrew,
which is typical if it's ever been overtightened.

A really nice one that looks like new should be worth near $100.
Jon

[sealer]

JonB_in_Glencoe ,
what has happened to the ammobrasstrader site ?
thanks, dennis

[JonB_in_Glencoe]

Sealer,
The domain name expired on 03/20/2012 and is pending renewal.
Rumor has it (via George) that Leonard's Ex is part of the problem.
Jon

[sealer]

the slides and reservoir don't show alot of wear, it has all the original screws that are not chewed up at all, the spring still works, and the casting hasn't been cracked. it's missing some paint, but it works perfect. i just sized about 400 bullets with it today just to try it out.
dennis