View Full Version : Lee TL430-240-SWC....Wheel-Weight Diameter
Southern Shooter
04-05-2012, 03:02 PM
For those using the Lee TL430-240-SWC, what diameter are ya'll getting when casting with pure wheel weights? .429? .430? .431? .432? Etc.?
43003
Thanks
ShooterAZ
04-05-2012, 03:06 PM
I have a six cavity that casts .431-.432. I size to .430 for my RBH.
ku4hx
04-05-2012, 03:13 PM
I have a six cavity that casts .431-.432. I size to .430 for my RBH.
Ditto
My Ruger SRH likes them unsized.
williamwaco
04-06-2012, 11:22 AM
Mine is not that bit.
Varies from .430 to .431.
.
Jim Flinchbaugh
04-06-2012, 11:52 AM
My 2 holer drops at 431-432 as well.
Larry Gibson
04-06-2012, 03:24 PM
My 6 holer with WWs + 2% tin drops them at .433. Just WWs is .431 - .432 and WWs + 50% lead runs right at .430 - .431. I also size at .430. I have TL's and shot at .431 - .433 and the sized .430s shoot justs as well in my Ruger BH 50th, Colt Anaconda and Hawes Western martial. I only load them to 44 SPL standard velocity loads in SPL cases, with Skeeter's 44 SPL load in SPL cases and 8.5 gr Unique in magnum cases.
Larry Gibson
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.