Duplicating a Stock for a Single Shot

[44-40]

I purchase a RADARCARVE duplicator and intend to duplicate a sporter stock that I have made a pattern of from one of my Springfield Trapdoors. The carver is setup as I think it should be but I have no setup instructions for it. I am just guessing at it. Does anyone have any experience WITH THE RADARCARVE duplicator. Instructions for any other duplicator are of little use to me. My plans are to go ahead and give it a try either this coming weekend or the following at the latest.

[montana_charlie]

Seems like somebody here http://www.radarcarve.net/ could fix you up with some instructions ...
CM

[DHB]

You can always mount a piece of soft pine and see what turns out. If it duplicates it fine, if not you have more experience, at no real loss.
DHB