Pan Lubing hard lube.

[A pause for the COZ]

I tried my 1st attempt at pan lubing some hard lube. This stuff is very hard. Could not push my cutter through it fully cold.
Just take the heat gun and apply some heat to soften the lube and cut and size as normal.

http://i33.photobucket.com/albums/d66/Kelly2215/100_8217.jpg

[zomby woof]

I use the exact same set up when I pan lube. I always gave a little heat to make it easier to cut them out. It works great!

[RU shooter]

Instead of going through all that you can just pull them out of the lube while its still luke warm by the nose with needle nose pliers Or cut them out again while the cake is still a little warm