Any Toyota auto machanics out there

[abunaitoo]

With all the smart people here, I just thought I'd give this a try.
Not having to much luck in other auto forums.

I have a 1990 Toyota 4Runner I'm working on.
V6, 5 speed.
I'm looking for someone who has access to a factory service manual.
I need the ECU pin-out voltage/ location chart.
This one has the ECU that has the 24-18-10 plugs. The charts I have are 26-16-12 plugs.

[Lee W]

You could try here:

http://www.toyota-4runner.org/classic-t4rs/35863-free-factory-service-manual-downloads.html

or here:

http://www.yotatech.com/f128/toyota-factory-service-manuals-fsm-all-years-156128/

[camaro1st]

http://www.ncttora.com/fsm/1990-1995_4Rnr/Toyota.4Runner.1990.1995/files/repair.html
try looking through here for what you need it has done me well

[gandydancer]

http://www.ncttora.com/fsm/1990-1995_4Rnr/Toyota.4Runner.1990.1995/files/repair.html
try looking through here for what you need it has done me well
Man who Pees uphill has a good working system.

[abunaitoo]

Thanks for the suggestions.
Tried them already.

Having DSL problems tooo.
Static on the line.
Waiting for the phone company to come out. Been waiting since 3/23!!!!

[abunaitoo]

This might help someone here someday.

Took a while, but got it.
This is a strange one. First tme I've had it happen to me.

The bearing in the distributor failed.
The shaft stopped turning. The gear on the shaft is just a press fit. No pin or keyway. Strange.
When the shaft stopped turning, the gear kept turning.
When the bearing let go, the shaft started turning again. Only now the timing is way off. Turned out to be almost 3 cly's off.
Gear was also pushed down the shaft about 5/16".
Pushed the gear back down, reset the engine to #1 TDC, installed the distributor.
Engine started.
Now I just have to find another distributor.