7 MM checkmaker & Latherunners alum.

[Mugs]

I was lucky to get acjacobson to make me one of his great checkmakers in 7 MM. Knowing that .014 alum. was not thick enough for 7 MM [ .253 + .028= .281] I got some of Latherunners .016 rolls [.253+.032=285] works great. Any of you looking for a great tool for 7 MM might try twisting acjacobsons arm. Any one wanting alum. in .016 try Latherunners rolls dead soft and forms great.

Mugs
IHMSA 5940L

[LatheRunner]

Mugs, Glad to hear the material worked for you.

LatheRunner

[snakesssssss]

hello,

My name is Mike I also live in VA. I heard that you can do custom inserts for 12 gauge shotguns. This post is where :
http://bushcraftusa.com/forum/showthread.php/22806-Shotgun-inserts

I am interested in a large number of long inserts in various calibers. I also have a question about a special insert idea I have for pumps or possibly autos. Wanna talk? email me at snakesssssss@gmail.com

MIKE

[LatheRunner]

hello,

My name is Mike I also live in VA. I heard that you can do custom inserts for 12 gauge shotguns. This post is where :
http://bushcraftusa.com/forum/showthread.php/22806-Shotgun-inserts

I am interested in a large number of long inserts in various calibers. I also have a question about a special insert idea I have for pumps or possibly autos. Wanna talk? email me at snakesssssss@gmail.com

MIKE

Snakessssss: Hello and welcome to the forum. I am afraid you have me confused with someone else. I believe the guy you are looking for is on GUN BROKER.com.

Latherunner

[fcvan]

I was stumbling about looking for chamber adapters (3o carbine in 30-06, etc) and found an outfit that does adapters and shotgun inserts up to 18" in length. Check it out.

http://www.mcace.com/shotguninserts.htm

That link goes straight to the inserts but you can check out their entire lineup. I emailed them on a Friday evening and heard back from them that same evening. I think it's a small family owned kinda thing.