loads for NOE 314008/.32 H&R ?

[dualsport]

What are you using? I have a Ruger SSM, looking for midrange to upper end to see what the new boolit will do. Can I get there with Trailboss? Thanks!

[jmsj]

Boy, I hope some people chime in on this one.
This is just what I am about to start on. I was looking for similar velocities out of a similar pistol, a SS Ruger Single-Six with a birdshead grip and a 4 5/8" barrel. I casted and sized the bullets saturday night and expanded and primed the brass last night.
I have not found any published data for the 32 H&R mag and 115-120 grain bullets. I found some posts here and on that advise was thinking about starting w/ 4.5 grains of Unique. I am sure dualsport and I would appreciate any advise.
Thanks, jmsj

[excess650]

Accurate Arms #7 is probably going to be the go-fast powder. Charges will be well above published charges in the factory manuals. I used #7 in my S&W M16 with Lyman 311008s. Accurate Arms lists 6.0gr in Federal cases with CCI 500 primers under both a 100gr cast and 100gr JHP at 20,000cup. I used higher charges with the 120ish gr Lyman boolit. Your gun may or may not tolerate it.

[canyon-ghost]

1.4 grains of Bullseye is for 50 yards, up to 1.9 grains Bullseye for 100 yards.

[dualsport]

I should mention I got the plain base option on my NOE 314008.

[MT Gianni]

I have got grreat results with Unique and hte RCBS 98 gr. I start at 4 gr and accuracy goes after 4.4 gr. I was going to decrease 10% for the heavier boolit but have not got that on the project list yet,

[Shooter6br]

Good source of info. Also 327 Fed loads[smilie=s:

[jmsj]

Shooter6br,
Thanks for the MD Smith link. I was going to start w/ 4.5 grains of Unique but now I think I'll back down to 4.0 grains.
Thanks jmsj

[Nobade]

You can't overload it with 296 or H110, and you'll be right speedy. Accurate #9 and Ramshot Enforcer can overload it, but will burn somewhat cleaner and possibly give a touch more speed if you are careful.

I shoot tons of them loaded with 5.5gr. AA#5 and the #3118 in my S&W, TC, Rugers, etc. Not a terribly hot load but easy to shoot and very accurate. It's my Hunter Pistol load, never fails to take a target if I can hit it. Cast from air cooled wheelweights and lubed with 50/50, never a hint of leading - there's no need for hard boolits at this level. About 1150 fps in the 6 inch revolver.

[rststeve]

I use 4.5 grains herco with great accuracy about 1050 fps good ground squirrel load

[dualsport]

OK, I got to try the plain base NOE 314008 today. Using 2.2 gr. of Trailboss in a Ruger SSM I shot the smallest 6 shot group I've ever shot with an iron sighted handgun, 1 5/8". That was at 25 yds. resting my hands on sandbags. Three of them were touching. I'm guessing in a Ransom Rest that would have been under 1 ". Good day for me, had a lot of no-gos lately. With my spirits up I decided to try offhand, old school style with one hand. This has been my curse forever. Thinking this may be the day things change, I shot a 9" group with the same gun and load. Oh well.