What do y'all think about Tac1

[flipajig]

I picked up 10 sticks for just over 1.50 a stick. Have any of y'all used this
In the description it sounded good for my use.

[cummins05]

I have used it with very good results sometimes needs just a tad or heat but not much could prolly force the lube through my 450 but it is just so much s
Mother with some heat seems to be a great product

[flipajig]

Thanks cummins I'm planing on useing it for my 358 and 429 Boolits

[fryboy]

i think it's tacky lolz , it could stand some heat but does ok at room temp ( umm central usa room temps not freezeyeruh-huhoff north pole room temps ) i received some in a sizer i bought and instead of wasting i put it to use , tho testing has been somewhat limited it has done great in 357 mag loads running pretty stout , i've lubed some rifle boolits as well but havent had a chance to shoot and evaluate them yet , it was designed for rifle velocities so pistol rounds ( including mags ) shouldnt be a problem , warming both the lube and boolits ( before applying ) and then allowing a day to dry seems to make them less tacky ( i use el cheapo plastic trays that come with factory rounds for this )

[turmech]

I use it in 38 spl, 357 mag, 45 acp, and 44 mag. Loads have ranged from 800 fps to 1400 fps. It has worked good in all. I only pan lube so I can't say about heat in a lubesizer. As stated a day to dry removes most/all of tackiness

[flipajig]

Thanks fellas
im just waiting for my molds to show up from midway
358 and 429 lee molds. should be here next week..
I just started casting my own so far for my 9mm going to shoot some this week in a steel chalange match im tumble lubing them with 45/45/10 im excited..
I have been shooting cast boolits for quite some time with good sucsess so I decided to cast my own
once again thanks I will keep yall posted on what I find..
FLIP..