dk17hmr
03-18-2012, 06:15 PM
My wife and I current live in a small (750 square foot) appartment, hopefully we will be in a house soon. The wife has been on me about getting the reloading room cleaned up, or what she calls "The Kitchen".
I have anywhere from 5,000 to 10,000 rounds loaded at any given time. How do I do that in a such a small apartment you ask. Well here are a couple pictures of my setup.
Hand me down kitchen table from the 70's
http://i48.photobucket.com/albums/f208/dk17hmr/IMG_20120318_145816.jpg
Custom reloading box, with LEE 4 hole turret press, Hornady power measure, RCBS beam scale, and 2 clamps.
http://i48.photobucket.com/albums/f208/dk17hmr/IMG_20120318_150313.jpg
http://i48.photobucket.com/albums/f208/dk17hmr/IMG_20120318_150343.jpg
What if I want to load rifle ammo on a single stage press or size cast bullets you ask. Simple, move the box back and clap the other board on the table, it has a Hornady single stage and a Lyman 45 bullet lube/sizer bolted onto. I use a small desk lamp with a 100watt light bulb as a lube heater.
http://i48.photobucket.com/albums/f208/dk17hmr/IMG_20120318_150547.jpg
Say some of my brass is getting long and needs to be trimmed. Use the small spring clamps to stick the Hornady case trimmer on the table.
http://i48.photobucket.com/albums/f208/dk17hmr/IMG_20120318_150641.jpg
Where do I keep all my powder, primers, and dies? I claimed a cabinet in the "laundry room"
http://i48.photobucket.com/albums/f208/dk17hmr/IMG_20120318_150738.jpg
All my casting is done on the back deck and I have a tumbler in a closet upstairs. Hopefully we can find a house with enough room soon so I can have my own reloading/gun room, but I get by right now.
I have anywhere from 5,000 to 10,000 rounds loaded at any given time. How do I do that in a such a small apartment you ask. Well here are a couple pictures of my setup.
Hand me down kitchen table from the 70's
http://i48.photobucket.com/albums/f208/dk17hmr/IMG_20120318_145816.jpg
Custom reloading box, with LEE 4 hole turret press, Hornady power measure, RCBS beam scale, and 2 clamps.
http://i48.photobucket.com/albums/f208/dk17hmr/IMG_20120318_150313.jpg
http://i48.photobucket.com/albums/f208/dk17hmr/IMG_20120318_150343.jpg
What if I want to load rifle ammo on a single stage press or size cast bullets you ask. Simple, move the box back and clap the other board on the table, it has a Hornady single stage and a Lyman 45 bullet lube/sizer bolted onto. I use a small desk lamp with a 100watt light bulb as a lube heater.
http://i48.photobucket.com/albums/f208/dk17hmr/IMG_20120318_150547.jpg
Say some of my brass is getting long and needs to be trimmed. Use the small spring clamps to stick the Hornady case trimmer on the table.
http://i48.photobucket.com/albums/f208/dk17hmr/IMG_20120318_150641.jpg
Where do I keep all my powder, primers, and dies? I claimed a cabinet in the "laundry room"
http://i48.photobucket.com/albums/f208/dk17hmr/IMG_20120318_150738.jpg
All my casting is done on the back deck and I have a tumbler in a closet upstairs. Hopefully we can find a house with enough room soon so I can have my own reloading/gun room, but I get by right now.