Drilling new holes in a Lyman heater

[snowwolfe]

Moving my resizer with the Lyman heater on the base to another bench. If I attach it to the new bench the rear mounting holes for the heater are right above a drawer so it will not work.

If I drill some new holes in the heater base about 1 inch in front of the original rear holes will I hit anything inside the heater that might destroy it?

[billyb]

The Lyman heater has a straight cartridge the diameter of the drilled in the side. Use a straight edge and draw a line from the edge of the hole in the side of the heater. Anything out side of the lines should be safe. Bill