PDA

View Full Version : plinkin with the big boys


white eagle
03-09-2012, 06:39 PM
anyone have any good plinkin recipes for the 480 rug ? [smilie=2::Fire:
tacklebury
03-09-2012, 06:59 PM
Bet if you put about 10 gr. Unique under a 325gr. RNFP you will get a decent plinker. ;)
white eagle
03-09-2012, 08:01 PM
will try that thanks
dubber123
03-09-2012, 08:37 PM
This works in the .475 Linebaugh, so it sould apply to the .480 as well. Pretty much anything from Bullseye to Power Pistol, 8 grains behind the LEE 400. Very accurate, and cheap to shoot.
Lefty SRH
03-09-2012, 09:51 PM
look up Trial Boss loads, can't get any softer than that....
white eagle
03-09-2012, 10:00 PM
unique and bullseye I have on hand
but will look into the T/B
Lefty SRH
03-09-2012, 11:06 PM
Hodgdon shows a load for the boolit mold you sold me (420gr) max charge of T/B at only 600FPS. You might be able to catch that by hand and save your lead you cast....thats IF it makes it out of the barrel. Have fun W.E.
Whiterabbit
03-10-2012, 03:20 AM
if it fits the cylinder, you can crank up the TB powder. They say no matter how much you get in there, it's a safe pressure. As long as it is not compressed.

That should give you extra wiggle room for some fun.