Lyman 450 Lube/Sizer Parts Diagram

[afish4570]

Instruction sheet and parts diagram needed. I stripped the thread rod that the lubricant slides over. I used my cordless drill to remove the pressure washer and buggered the rod. Is this easily repaired???afish4570

[edler7]

Lyman 450 parts diagram and manual here, page 5- PDF file. (http://www.google.com/url?sa=t&rct=j&q=lyman%20450%20lube%20sizer%20manual&source=web&cd=7&ved=0CFYQFjAG&url=http%3A%2F%2Fpdf.textfiles.com%2Fmanuals%2FFIR EARMS%2Flyman_sizerandlubricator.pdf&ei=6ShLT4KjIIqMsALw4eDqCA&usg=AFQjCNENOaUL4JaiYYbBSBnvfq8D0fT9IQ&cad=rja)

Lyman order form here. (http://www.lymanproducts.com/store/page151.html)

I had to find these just the other day, so I had them bookmarked.

[afish4570]

Lyman 450 parts diagram and manual here, page 5- PDF file. (http://www.google.com/url?sa=t&rct=j&q=lyman%20450%20lube%20sizer%20manual&source=web&cd=7&ved=0CFYQFjAG&url=http%3A%2F%2Fpdf.textfiles.com%2Fmanuals%2FFIR EARMS%2Flyman_sizerandlubricator.pdf&ei=6ShLT4KjIIqMsALw4eDqCA&usg=AFQjCNENOaUL4JaiYYbBSBnvfq8D0fT9IQ&cad=rja)

Lyman order form here. (http://www.lymanproducts.com/store/page151.html)

I had to find these just the other day, so I had them bookmarked.

Thanks.... for the Lyman lube/sizer info.....Also I wandered onto a source of info on this site.....cut & paste this to your brouser
http://www.castpics.net/subsite/default.html
Lots of stuff if you know where to look. Afish4570[smilie=s:[smilie=s:

[LUCKYDAWG13]

think you can buy that as a kit

[Shiloh]

Had to replace the linkage on mine. Old one broke and they no longer have parts.
They have an upgrade kit though.

SHiloh

[SSGOldfart]

lots of good info,but mine has a different handle then the 450 shown? it has Lyman on one side&450 on the other side down on the die housing and under the bullet knock-out link it has LO1-A and a very small "p" below the Lo1-A?????

[Walter Laich]

Calling is what I do when I want a quick back and forth exchange of information

[SSGOldfart]

Yep that's what I'll have to do I'm thinking there's a upgrade out there?

[taco650]

Talk about resurrections! This thread was dead for two year prior to yesterday!

[newcastter]

I recently purchased an old 450 in great shape only there is no Pressure Nut, I thought I had read somewhere that some older models did not have one. I am planning on just ordering one anyway.
Anyone have any advice on doing a complete tear down and/or tuning up? Last thing I want to do is fill it with lube to only find out it needs more work.

[338RemUltraMag]

glad this one came back from the grave, I have to buy the parts to fix 2 of these 450's one found it a dumpster and the other bought here for 25 bucks.

[dakota]

That's a 4500 parts diagram. Will parts #2 and #3 work in my 450? It leaks lube around this part in my 450. Thanks.

[dakota]

Good Morning,

Yes, those parts will work in the 450. Attached is a parts diagram for future reference. If you would like to place an order for those parts, please call customer service at 1-800-225-9626 between 9 am – 4 pm EST.

Best Regards,

Customer Service
Lyman Products Corp.
475 Smith St., Middletown, CT 06457
Phone: 800-225-9626
https://3c-lxa.mail.com/mail/client/attachment/view/tmai14bb21e6851050d0/aW1hZ2UwMDEuanBnQDAxRDJDM0ZGLjk4RUY2QkIw;jsessioni d=445F80E111CF4B06A1225B27C16A62CC-n2.lxa03b

[gwpercle]

I went ahead and ordered every part / rebuild kit I could for my 450.....you never know when the parts will be discontinued / out of stock and no longer available . I saved on shipping !

[dakota]

Those parts cost $9.25 shipped.