338cal Pointy Mould GB

[Blammer]

I will be running the GB and we well be using Night Owl Enterprise (NOE) to make the moulds.

A minimum of 5 orders for moulds is required to waive the tooling cost and be placed on the production schedule. This is a small group buy based on a 311365 that NOE has already produced.

Post your order on this thread. I will keep the post below this updated with the orders. When the 5th order has been placed (doesn't have to be paid for) we will then be put on NOE's production schedule.

You may order any number of cavities available. You will just need to pay the appropriate price.

1 cavity moulds are $68 ea.
2 cavity moulds are $72 ea.
3 cavity moulds are $79 ea.
4 cavity moulds are $85 ea.
5 cavity moulds are $92 ea.

The hollow point option for one cavity will be the standard $35.
Blank Hollow point pins will be an extra $1.50 each.

Shipping to you with insurance will be $10

A Lyman, RCBS type top punch is included along with a sample of Bull Plate sprue lube.

I'm the honcho

Darrell Steenwyk
112 Old Lime Kiln Rd
Arden, NC 28704

What you must do:
Send me a letter with your handle, your shipping address, what you ordered, and the money. (check or MO is fine)
The buy will remain open until one month prior to production. ONE MONTH PRIOR TO PRODUCTION I WILL CALL FOR PAYMENT. You do not need to pay prior to this, but you can if you want.
When I call for payment I will need all payments in within the week or you will miss out.

For those out of country please PM me for details on payment options and shipping costs.

NOE will ship them all to me and I’ll test cast with a few of them and then if all is well, send out the moulds.

http://i54.photobucket.com/albums/g81/blammer8mm/Cast%20boolits/338/1111-185-341250grSP.jpg

[Blammer]

Who wants what.
all are GC
PAID

1. shangrila 4C; drill for probePAID
2. idaho sharpshooter 4C
3. ammohead 4CPAID
4. charlie in co 4C PAID
5. blammer 4C; drill for probePAID
6. sffar 2C + HP; drill for probePAID
7. shawnsmc 2C
8. danny.k 4C PAIDPP
9.
10. bobj 5C; drill for probePAID
11. aaronj 4CPAID
12. ed in north texas 3CPAID
13. DDriller 3CPAID
14. dromia 4C; drill for probe
15. frnkeore 2C 1PB 1GCpaid
16.
17. captain awesome 2Cpaid
18. Highhook 4C ; drill for probePAID
19. geraldsd 2C
20.
21. thecelt 4C + HP; Drill for probePAID
22. flycutter 5C + HP+extra pinPAID
23. rick459 2CPAID
24. thecelt 2C+HPPAID
25. fallout4x4 4C + HPpaid
26. chrisw 2C + HP + extra pin drill for probePAID270gc's too

[shangrila]

I'm interested in a 4 cav, GC.

unluckyone at mailcity dot com

[Idaho Sharpshooter]

4-cavity please, and GC.

I would go for the other one as well if Swede wants to cut one.

Rich

[ammohead]

I reckon it will be a while before these are made, so put me down for a 4 cavity gas check.

ammohead

[Charlie in Co]

Put me down for a 4 cavity GC

[sffar]

I'm in for a 2C GC with one hollow pointed.
Sam

[shawnsmc]

I'm in for a 2 cavity GC

[danny.k]

4 holer with gc.

[Splatter]

4 cavity for me, please.

[Bob J]

5C gas checked for me....[smilie=s:

[AaronJ]

I will take a 4 cav gascheck

[Hardcast416taylor]

I`ll go in for a 3 cavity GC. Just for the record, what alloy is used to determine the 250 gr. weight?Robert

[DDriller]

I would like a 3 cav GC

[Blammer]

update post #24

[Blammer]

WW alloy is used to calculate the wt.

[Hardcast416taylor]

WW alloy is used to calculate the wt.


Thank you sir.Robert

[dromia]

Four cavity drill for probe please Darrell

[Blammer]

updated

[shangrila]

Sorry Blammer, forgot to add drill for probe on mine. Thanks!

[Blammer]

updated

[Bob J]

Forgot to add the drill for probe for me as well..... Sorry.....

[sffar]

I'd like mine drilled as well. Thanks.
Sam

[Blammer]

updated post #28

[Blammer]

updated

[Just Duke]

If it was only 300 grains......

[frnkeore]

Please add me to the list for a 2 cavity, one plain base, one gas check if possible.

Frank

[Blammer]

updated post #34

[scb]

If it was only 300 grains......

I tried:

http://castboolits.gunloads.com/showpost.php?p=1398772&postcount=15
http://castboolits.gunloads.com/showthread.php?t=108788

[x101airborne]

Oh, what in the hey....
I will take one
4 cavity, one hollow point, all gas checked, drill for probe.
x101airborne at yahoo dot com

[Blammer]

updated

[captain awesome]

ok, count me in for a 2 cav. if any one can come up with a pointy 300 grainer mold, shoot me a pm.

[HighHook]

4 cavity gc, 1 hp, probe please

[Blammer]

updated post #39

[geraldsd]

I would like one! 2 Cavity, no hollowpoint Definitely GC

[HighHook]

Hey Blammer,

Line# 18 Put in my name (Highhook 4C + HP ; drill for probe) Thanks

[Blammer]

doh! that were dumb! :)

[Just Duke]

OK I'll cave in
5 cavity moulds are $92 ea.

[Blammer]

Who wants what.
all are GC
PAID

1. shangrila 4C; drill for probe
2. idaho sharpshooter 4C
3. ammohead 4C
4. charlie in co 4C
5. blammer 4C; drill for probe
6. sffar 2C + HP; drill for probe
7. shawnsmc 2C
8. danny.k 4C
9. splatter 4C
10. bobj 5C; drill for probe
11. aaronj 4C
12.
13. DDriller 3CPAID
14. dromia 4C; drill for probe
15. frnkeore 2C 1PB 1GC
16. x101airborne 4C + HP ; drill for probe
17. captain awesome 2C
18. Highhook 4C + HP ; drill for probe
19. geraldsd 2C
20. Duke Nukem 5C
21. thecelt 2C

[TheCelt]

Howdy Blammer,

If this GB is still open I'd like a 2 cavity GC

Thanks!

[Blammer]

updated

[SwedeNelson]

Doing a update
Will try to keep all buys current on the schedule:
http://castboolits.gunloads.com/showthread.php?t=142415
If you have questions about our policy you can see it here:
http://castboolits.gunloads.com/showthread.php?t=156593

Bump

Swede Nelson

[Hardcast416taylor]

Due to the fact that Swede has made a change in mold making orders, which is sound business sense, and the fact that this pointy .338 mold is "possibly" next year for the doing. I must regretfully ask that my name be taken off the list of wanting a mold made.Robert

[DDriller]

We need some more signed up to get this one to 30. [smilie=1:

[FLYCUTTER]

I'm in on a 5 cavity all GC, 1 HP, with a extra pin.

I forgot to add,"Drill For Probe"

[Rick459]

if this buy is still on i would like a two cavity GC.
Rick

[Blammer]

updated

[Ed in North Texas]

Don't know how I missed putting this one on my "want" list, but I can fix that. Put me down for a 3 cavity.

Ed

[Blammer]

updated

[FLYCUTTER]

I'm #22 on the list and can you up date my request on post 45. Add drill for probe and gas check
design on all . Thank You.

[Just Duke]

Has anyone done any reloading for cast .338?

[Just Duke]

I guess this would be cool in a 338-06 or 338-308.

[Rick459]

Duke,
i have only loaded cast for the .338/06 and am having good results with the Lee 220 mold. can't wait to get this mold to try.HTH
Rick

[Just Duke]

Duke,
i have only loaded cast for the .338/06 and am having good results with the Lee 220 mold. can't wait to get this mold to try.HTH
Rick


Thanks Rick. [smilie=w:

[Slow Elk 45/70]

OK Brother, put me in for a 2 cavity GC/w pins for 1 HP
Semper Fi ! Jim

[Blammer]

updated

[AaronJ]

Is it possible to also put in an order for some 338 checks to go with this mold like is being offered with the 8mm version? If so I would be interested in some as this is my first 338 mold and I will defiantly be needing gas checks.

[Blammer]

as time gets closer and I call for money, then remind me I can work on getting some in stock to save on shipping.

easiest way for me would be if you ordered on the GC GB login and included the invoice with a note on your mould order when you pay.

[fallout4x4]

This will be my most expensive mold yet. Put me down for a 4 cav 1 hp please.

############################
I use Tapatalk

[Blammer]

NOE JUST emailed me and said you can start a call for payment because this and all the other ___365 pointy moulds will be made in Dec. :)

[Splatter]

NOE JUST emailed me and said you can start a call for payment because this and all the other ___365 pointy moulds will be made in Dec. :)

Really? Or did you mean to click on the "pulling your chain" smilie?

(at 40 days before xmas, I'm kinda hoping that you're kidding)

[Blammer]

yep, seriously, if you want one better get on the list a get ready to burn a hole in your pocket.

[chrisw]

hi!
can you put me down for a 2 cavity, gas checked, 1 HP w/ extra pin, drilled for probe?

also- you asked for a reminder to add gas caps when it got close IIRC

thanks!
Chris
cwillis at mail dot com

[Blammer]

updated, thanks Chrisw

I'll get some on the GB login, order some and print the invoice and send it all in at once, i'll get it together. No more than 2,000 with a mould.

BTW, these are gas caps

http://www.bing.com/images/search?q=gas+caps&qpvt=gas+caps&FORM=IGRE

I have gas checks.

[chrisw]

updated, thanks Chrisw

I'll get some on the GB login, order some and print the invoice and send it all in at once, i'll get it together. No more than 2,000 with a mould.

BTW, these are gas caps

http://www.bing.com/images/search?q=gas+caps&qpvt=gas+caps&FORM=IGRE

I have gas checks.

LMAO! Sorry bout that!

oh- drilled for probe too!

thanks!

[Blammer]

:)

you're welcome, and all updated

[FLYCUTTER]

Hey Darrell, How about asking Swede if he will run the 311365 in the 300 gr. along with the 250 gr. I know the 300 is on the discussion board but it would be Kool if he could run both pointy molds . Thanks, FLYCUTTER

[Blammer]

updated

[Blammer]

once the buy is closed, that's it....

[TheCelt]

Blammer,

I'm #21 on the list, can you change my request from the 2C to a 4C and drill for the probe.

Thanks


once the buy is closed, that's it....

[Blammer]

This buy is closed!

[Blammer]

updated

[Blammer]

Updated

[Blammer]

Friday is the last day! NOE will start cutting moulds. If you said you'd pay but haven't you better get to it!

If you don't see one of these next to your name * your mould will NOT get made, and you'll have to get one directly from NOE and what he keeps in inventory.

Typically he doesn't keep moulds with mix and match plain base an gas check cavities on the inventory shelf.

[ammohead]

Blam, There is no asterisk by my name and it does not say paid. My check to you cleared the bank on the 27th. What gives? Is this due to the new format? I am looking at the list on page 1 of this thread. Name on check is Bruce R Frechette.

ammohead

[Blammer]

PM sent

list updated

[Blammer]

updated

[Blammer]

Updated

[Blammer]

updated

[Blammer]

Mould blocks are cut, awaiting cavities, assembly and delivery

[TheCelt]

Mould blocks are cut, awaiting cavities, assembly and delivery

Any update on these molds Blammer?

[frnkeore]

I'm also awaiting info.

Frank

[Blammer]

I am earnestly expecting them this week!

[Blammer]

UPDATE: I just received the 338 moulds in the mail today!

I'll work on getting them out to you guys now.

[TheCelt]

You are THE MAN Blammer!!!!


UPDATE: I just received the 338 moulds in the mail today!

I'll work on getting them out to you guys now.

[chrisw]

perfect timing! I hope to need some of those GC soon!
your awesome!

[Blammer]

Who wants what.
all are GC
PAID
Shipped 1/14/13

1. shangrila 4C; drill for probePAIDShipped 1/14/13
2.
3. ammohead 4CPAIDShipped 1/14/13
4. charlie in co 4C PAIDShipped 1/14/13
5. blammer 4C; drill for probePAIDShipped 1/22/13
6. sffar 2C + HP; drill for probePAIDShipped 1/14/13
7.
8. danny.k 4C PAIDPPShipped 1/14/13
9.
10. bobj 5C; drill for probePAIDShipped 1/14/13
11. aaronj 4CPAIDShipped 1/26/13
12. ed in north texas 3CPAIDShipped 1/14/13
13. DDriller 3CPAIDShipped 1/14/13
14.
15. frnkeore 2C 2PB paidShipped 1/14/13
16.
17. captain awesome 2CpaidShipped 1/14/13
18. Highhook 4C ; drill for probePAIDShipped 1/14/13
19.
20.
21. thecelt 4C + HP; Drill for probePAIDShipped 1/14/13
22. flycutter 5C + HP+extra pinPAIDShipped 1/14/13
23. rick459 2CPAIDShipped 1/14/13
24. thecelt 2C+HPPAIDShipped 1/14/13
25. fallout4x4 4C + HPpaidShipped 1/14/13
26. chrisw 2C + HP + extra pin drill for probePAID270gc's tooShipped 1/14/13

[chrisw]

yup- and the 338/458 GC too if they are in stock yet!

thanks!!!

[IIJSavoy]

I hate I missed this one...just started playing with the .338 Win Mag.

Oh well, next time around....

[Blammer]

check NOE's site I think he has a few extra's. :)

[Blammer]

Ok, all are shipped out, except for the few that have multiple molds going at the same time.

[Wayne S]

Blammer,
Is this a copy of an existing bullet, or an enlarged 311365 ?

[frnkeore]

Thank you, Blammer. You put a big smile on my face.

Frank

[chrisw]

Thank you, Blammer. You put a big smile on my face.

Frank

+1 I couldn't have put it better. I can't wait til Wed!

[Blammer]

wayne s, it's just a scaled up 311365 to 341 dia for the 338's.

[chrisw]

WOW! It has arrived and She's gorgeous! Thank you so much Blammer!

I can't wait to try it!!!


the bullet looks, well, unbelievable!

[ammohead]

Got mine today, just gorgeous. Can't wait to see if my 338-06 likes it as much as I do.

[Ed in North Texas]

Mine arrived today also. Need to get the .338 Federal barrel on my Encore and see how she shoots.

Ed

[HighHook]

Yep! Got-it! Another great mold from you guys. Thank you.

[sffar]

Got mine yesterday, Blammer. Looks great! The HP cavity looks like it'll make a fine hunting bullet. Many thanks to you and Swede for making this happen.
Sam

[Rick459]

thanks Blammer. recieved my mold yesterday and she is Beautiful. thanks again for letting me participate in this group buy.
Rick

[frnkeore]

I got mine today.

thank you,

Frank

[Wayne S]

Now that these are getting into casters hands, would someone see what accuracy potential this bullet has. And when I say potential I'm looking for groups shot at 100 yds or more. I'm thinking about a 338 Fed. Bbl. for my Savage swap bbl. system

[danny.k]

Recieved my mold yesterday.
Thanks Blammer!

[Blammer]

this buy is done, all moulds are shipped.

thank you for your patience.