NOE LFN 41mag GB

[Blammer]

I will be running the GB and we well be using Night Owl Enterprise (NOE) to make the moulds.

Post your order on this thread. I will keep the post below this updated with the orders.
This buy is on the schedule.
We will keep the buy open until 2 or 3 weeks before the date on the schedule.
At that time we will close the buy and send out a PM with
a request for payment. We don’t require payment before then.

You may order any number of cavities available. You will just need to pay the appropriate price.

1 cavity moulds are $68 ea.
2 cavity moulds are $72 ea.
3 cavity moulds are $79 ea.
4 cavity moulds are $85 ea.
5 cavity moulds are $92 ea.

The hollow point option for one cavity will be the standard $35.
Blank Hollow point pins will be an extra $1.50 each.

RG2 $96
RG4 $126
RG’s come with the HP set of pins and a Flat Point set of pins.
Set of extra pins for the RG $8

Flat point and HP options are available.
Plain base and GC options are available.
You may mix and match PB and GC in the same mould.
Gas checks to be used will be the 416’s.
Shipping to you with insurance will be $10

A Lyman, RCBS type top punch is included along with a sample of Bull Plate sprue lube.

The below picture will show the HP version.

What you must do:
Send me a letter with your handle, your shipping address, what you ordered, a return address, and the money. (check or MO is fine)


For those out of country please PM me for details on payment options and shipping costs.

NOE will ship them all to me and I’ll test cast with a few of them and then if all is well, send out the moulds.

Here are the pics with dimensions.

http://i54.photobucket.com/albums/g81/blammer8mm/Cast%20boolits/41%20Mag/41LFN230grdim.jpg

http://i69.photobucket.com/albums/i80/swedenelson/1111-124-41Cal230GrLFN.jpg

http://i69.photobucket.com/albums/i80/swedenelson/41Cal230GrLFNMould003.jpg

http://i69.photobucket.com/albums/i80/swedenelson/41Cal230GrLFN.jpg

http://i54.photobucket.com/albums/g81/blammer8mm/Cast%20boolits/41%20Mag/DSCN8302.jpg

Who want's what.

you will need to specify GC or PB and how many of each.

Shipped on 1/18/2014

1. blaser.306 5C 3GC 2PB PAID ppShipped on 1/14/2014
2. bodydoc447 5C PBPAIDShipped on 1/14/2014
3. canyon-ghost RG2 GCPAIDShipped on 1/14/2014
4. x101airborne RG4 all PB
5. mold maker RG4 all GC PAIDand shipped 1/27/14
6. cootie RG4 2GC 2PB PAIDShipped on 1/18/2014
7. guntotinamerican RG2 1PB 1GC + extra set of pins
8. highhook RG4 2gc 2pb PAIDShipped on 1/18/2014
9. 376steyr RG4 pbPAIDShipped on 1/18/2014
10. flycutter RG4 all GC + extra set of pins PAIDShipped on 1/18/2014
11. bearcove 5C PB drill for probe PAIDShipped on 1/15/2014
12. jaydub in wi 4C PBPAIDShipped on 1/15/2014
13. woodpile RG4 PB
14. colt saa RG4 all PBPAIDShipped on 1/15/2014
15. leftysrh 4C PBPAIDShipped on 1/15/2014
16. bullfrog54 RG2 PB
17. DeadWoodDan RG4 2GC 2PBPAIDShipped on 1/15/2014
18. charlie aka the deacon 4C GC
19. doc stihl RG4 2PB 2GC + extra blank pins
20. ratboy 5C GCPAIDShipped on 1/15/2014
21. vtnam68 RG2 1GC 1PBPAIDShipped on 1/15/2014
22. TCTex 4C GC ($70 applied from 358009 overpmt) $25 due PAID in fullShipped on 1/18/2014
23. J.. 4C PBPAIDShipped on 1/18/2014
24. J.. RG4 PBPAIDShipped on 1/18/2014
25. mustang 3C GC+ HPPAIDShipped on 1/18/2014
26. J.. RG4 GCPAIDShipped on 1/18/2014
27. tbhutton RG4 GCPAIDShipped on 1/18/2014
28. wch 3C PBPAIDShipped on 1/18/2014
29.
30. missionary5155 3C 2GC 1PBPAIDPP9/18/13Shipped on 1/18/2014
31. wvboone RG4 2PB 2GCPAIDShipped on 1/18/2014
33. thecelt RG4 GC ; drill for probePAIDPAIDShipped on 1/18/2014
34. osteodoc08 4C PBPAIDShipped on 1/18/2014
35. gregP42 3C 2GC 1PBPAIDShipped on 1/18/2014
36. wallym3 RG2 1pb 1GC PAIDShipped on 1/18/2014
37. richp 2C GCPAIDShipped on 1/18/2014
38. capt. methane RG2 GC NOE handles and will ship from NOE :)
39. larrydean 4C 2PB 2GC PAIDShipped on 1/18/2014

[blaser.306]

I'll be the first! 5 cavity gas check please. And I'll get it drilled for temp probe as well .Thanks again Al , and Dj.

[Bodydoc447]

I'm in for a 5 cavity plain base mould, please.

Doc

[canyon-ghost]

I need one RG2 mold, GC Absolutely have to have that big round hollowpoint.

Thanks for taking it on, DJ.

Ron

[Blammer]

updated post #12

[x101airborne]

If it would be possible to get an RG-4, all plain base with standard set of pins. Thanks!

[mold maker]

RG4 GC for me.

[Blammer]

updated

[blaser.306]

shameless bump!

[cootie]

I would like a rg4 with 2 pb and 2 gc cavities. Estimated time on this buy please?

Question on these buys being new to this. When the time comes for pmt how am I notified? Do I need to check this site?

[Blammer]

cootie, I'm the honcho, i'll send you a PM about a month before the mould is ready. That will be the time to send in payment.

[Blammer]

updated post #16

[bdicki]

Put me down for a 5 cavity plain base

[Blammer]

updated

[GunTotinAmerican]

I'll take a RG2 GC 1 cavity with extra set of pins.

[Blammer]

updated post #21

[bdicki]

I have to back out of this one, I just figured out that I already have one of these that I bought when they were in stock. Sorry.

[Blammer]

updated

[HighHook]

I am in for a RG4 2 gc 2pb

[376Steyr]

I'll take a 5 cavity PB. Thanks!

[Blammer]

updated post #1

[SwedeNelson]

Update
Will try to keep all buys current on the schedule:
http://castboolits.gunloads.com/showthread.php?t=142415
If you have questions about our policy you can see it here:
http://castboolits.gunloads.com/showthread.php?t=156593

Bump

Swede Nelson

[AlabamaEd]

Please put me down for RG4 2gc 2pb

Thanks,

[Blammer]

updated

[Bodydoc447]

bump for interest

[FLYCUTTER]

put me down for a RG4 ,all with GC and a extra set of pins. Thanks
Bob

[Blammer]

updated

[mold maker]

Blammer, change my order (5. mold maker RG4 all PB) to all GC

[Blammer]

updated

[mold maker]

This GB doesn't seem to be growing by leaps and bounds. Do ya think it will ever fly?

[Blammer]

I has once. :)

who knows in the future.

[AlabamaEd]

Take me off this one, please. Thanks

[Blammer]

updated

[376Steyr]

Blammer, please change my order to an RG4, all PB. Thanks!

[Blammer]

updated

[bearcove]

2 Cav PB bump

[Blammer]

updated

[jaydub in wi]

I'll take a 4 cav PB please

[Blammer]

updated

[mold maker]

Is this bird ever gonna fly??

[Blammer]

it did once....

[woodpile]

put me down for an RG4 no gas checks

[Blammer]

updated

[GregP42]

it did once....


It did? I must have missed it then. Am I still on the list?

Greg

[Blammer]

you're not on this list. Want to be?

[Blammer]

kicked to top

[Lefty SRH]

Any idea when this mold will be cut, especially with the recent changes at NOE?

[Blammer]

I have no idea.

[colt_saa]

Well I should get in on this one.

RG4 all PB

[Blammer]

updated

[Lefty SRH]

Sign me up for a 4C PB SOLID.

[Blammer]

updated

[Bullfrog54]

Im in for an RG2 pb.

[Blammer]

updated

[DeadWoodDan]

Please add me for an RG4 2GC 2Pb.
Thanks
DWD

[Blammer]

updated

[Charlie, AKA The Deacon]

4cav. GC solid Please

looks like this one is a ways out yet!

[Blammer]

updated,

yep it may be a while.

[Doc_Stihl]

I'll get in on the list.

RG4 2PB-2GC Extra set of pins.

[Blammer]

updated

[ratboy]

i would like a RG4 GC please

[canyon-ghost]

Oops, I'm already on this buy, lol.
Ron

[blaser.306]

I just had a look at the production scedule and this one is still only showing 12 moulds requested? By my count with the 19 shown and the last two posts for 1 ea. making it 21! We may actualy see this mould cut after all??? I have a T/C contender that desperately needs feeding and all the Lyman moulds that I have tried wont cast even close to .410" let alone .411".

[Blammer]

updated

[Blammer]

updated

[Vtnam68]

I would like 1 RG2 with a PB & GC in the same mold, please.

[Blammer]

updated

[TCTex]

Put me on the list for a 4 Cav, all GC

Blaser, that makes 22... LOL

Duane

[Blammer]

updated

[TCTex]

Blammer, per our PM’s Please apply the 70 dollar balance of the 358009 GB to this GB. I ordered a 4 cav-GC at 85 + 10 shipping. 95-70=25. If my math is correct, I still owe 25 on this run

Thanks

Duane

[J..]

I'd like a 4-cav PB, and a PB RG4.

[Blammer]

updated

[FLYCUTTER]

Hey Blammer, how about running some gas checks with this buy.

[MUSTANG]

Please add me to the list for:

3 cavity mould, one cavity hollow point, Gas Check. Plain Base.

Mustang

[TCTex]

Blammer, i am just trying to make sure the rest of my payment got to you

[J..]

In for a penny, in for a pound.... in addition to the two moulds I requested, please put me down for an RG4 GC as well.

So addictive.....

[TCTex]

Did anyone notice it made the October production list?

[Blammer]

updated

[bearcove]

What is the gas check dia on these?

[Blammer]

416 gc's are what these are slated for.

[ratboy]

:coffeecom

[tbhutton]

Hi -

Please add me for a RG4 all GC.

Thanks!

[Blammer]

updated

[bearcove]

11. bearcove 2C PB

Change this to a 5 cav PB

Thanks

[Blammer]

updated

[dusty341]

Please add me to the list I'm in on a RG4 PB

[wch]

I'd like a three cavity FP mold.

[Blammer]

updated wch, PB or GC version?

[wch]

Oops, PB, please.
Thanks.

[Hamish]

Big D, please put me on the list for:

Hamish RG2 PB

Thanks sir.

[Blammer]

updated

[Blammer]

updated

[ratboy]

Blammer,
please change mine from an RG4 to a 5cav.
many thanks

[Blammer]

updated

[missionary5155]

Howdy Blammer
Please inscribe me for a three cavity. 2 GC and one PB Will ship to ILLinos 61834
Thanks a bunch of bananas ! Mike in Peru

[Blammer]

updated

[pauly]

G'day from Downunder . [smilie=s:

G'day All , I have just listed a new in the box RG2 one of these available for immediate sale in the classified section , I have never used it as I prefer my brass molds so I have decided to move it on .

Regards Paul . :smile:

P.S. Blammer if you think this post is out of line please delete

[wvboone]

Blammer, Please put me down for a RG4 with 2PB and 2GC


Thanks

[Blammer]

updated

[TheCelt]

Howdy Blammer,

Please put me down for an RG4 gas check mold, drill for probe

[Blammer]

updated

[dusty341]

Please remove me from the list. I just bought one from a forum member. Thank you

[Blammer]

updated, thank you.

[Blammer]

This buy will be closing soon! So make sure you are getting what you want!

[Lefty SRH]

This buy will be closing soon! So make sure you are getting what you want!

How soon?

[Blammer]

In approximately two weeks I'll make the official call for payment and close the buy.

Yea!

[missionary5155]

Blammer Thanks for another super job with this mold ! Mike in Peru

[osteodoc08]

Blammer,

Please put me down for a 4 cavity plain base.

Thank you

[GregP42]

I thought I was on the list for this one, but it appears not. Put me down for a 3 cavity, 2GC 1 plain.

Greg

[blaser.306]

I would like to change my mould to 4 g/c and 1 pb #1 on the list. Thanks.

[Blammer]

updated

[Blammer]

updated

[ratboy]

my order lost its base description so before i get asked i would like gas check.
do you have a guesstimate on close time?
and thank you for getting another mold done

[Blammer]

updated, thanks!

not sure on exact time but it's getting closer for sure!

[WallyM3]

I'd like to get in for RG2.

wally (dot) murray3 (at) g mail (dot) com

[Blammer]

updated

[Blammer]

wallym3, GC or PB?

[WallyM3]

Sorry, Blammer: PB.

[RICHP]

Put me down for a 2 cav., gas check with a flat point. richlp1 at verizon dot net.

[Capt. Methane]

Blammer, quick, sign me up-need the LFN profile for my Marlin!

RG-2 w/GC, let me know, thanks!

ke4vmc at g mail dot com

What kind handles do these require?

[Lefty SRH]

Blammer, quick, sign me up-need the LFN profile for my Marlin!

RG-2 w/GC, let me know, thanks!

ke4vmc at g mail dot com

What kind handles do these require?


You can use LEE or RCBS on NOE molds

[Capt. Methane]

Thanks Lefty!

[Larrydean]

Hi Blammer, I would like one of these molds also, 4 cavity 2PB 2GC
larrydean51@outlook.com P.S. How much and how do I send the money(check or m.o.)?

[Blammer]

updated.

lee 6cav work fine OR NOE sells handle for them he makes they are GREAT.

[Blammer]

updated

larrydean, check or MO is fine

if you check out the very first post it should have all the information you ask about.
Yours will be the cost of a 4C plus the shipping.
I will make a call for payment as the time gets closer, so make sure you check your PM's here on occasion. :)

[Blammer]

This buy is CLOSED!
Call for payment is now. Emails sent out!

As soon as the payments are in NOE will run the mould.

[Capt. Methane]

Outstanding!

[FLYCUTTER]

FINALLY !!!! All right !

[Lefty SRH]

Blammer, PM with the email info. My wife and are in the middle of moving our house hold so my home computer and email is disabled.

[bearcove]

I would like mine drilled for probe.

[DeadWoodDan]

Payment went out this a.m.
Thank you all
DWD

[Lefty SRH]

Snail mail payment has been sent.

[RICHP]

Check is on the way.

[Capt. Methane]

Blammer-as we discussed payment is on the way directly to NOE to get the mould with handles, thanks for running this one and for the help!

[Blammer]

updated, thanks

[osteodoc08]

PM sent

[Blammer]

thanks

[Blammer]

Hutton from GA? need your handle please to mark you as paid.

[Blammer]

updated

[Blammer]

thanks greg, you're all set.

[Blammer]

I need all payments in by Friday Nov 8th or at least a PM telling me it's on the way!

If you don't have a PAID marked by your name read the last few posts. I got letters with payments and no idea on who it is. I can't match the login name here to an address.

contact me via PM to make sure you get what you ordered!

[osteodoc08]

I'm getting excited now to cast some up and get them ready for the end of deer season here in GA. Woot Woot! Thanks again Blammer for spearheading this.

[Blammer]

I have one letter now with payment I cannot match up (thanks for those sending PM's to help me out)

hutton from lilburn, GA? I need your handle please.

I need this so I can mark you as paid and you get your mould.

Thank you.

Darrell

[bearcove]

Just got back. PM coming

[Blammer]

I have two letters I need help with.

Hutton from lilburn GA?

and Calzaretta from Florida?

I need you to pm me with your login names so I can mark you as paid.

[Blammer]

updated

[Capt. Methane]

Any word on shipment? I'm itching for this one, sizing dies should be coming from Lathesmith shortly!

[osteodoc08]

Blammer,

Any update on the molds? If you've received one, have you had a chance to cast with it yet?

I was hoping to experiment with it over the Christmas holiday.

[Blammer]

nothing yet! soon I hope!

[Blammer]

update, the toolmaker had to "fix" the tool for this buy, and about the time the tool went to the shop the tool guy had knee surgery! DOH!

Hoping to get the fixed tool back this week.

[WallyM3]

Murphy's in town!

[Capt. Methane]

Murphy's in town!

Murphy is an optimist...

[osteodoc08]

Murphy is an optimist...

So are we half fixed?

Waiting in suspense on this mold. Have high hopes

[Blammer]

spoke to Al today, things are working!

[Blammer]

list updated

[FLYCUTTER]

Blammer do you hear any more scuttlebutt on production ? I'm chomping at the bit on getting this mold.

[Blammer]

I have not, sorry, I too am anxious.

[Capt. Methane]

This will be my first HP mould and I'm looking forward to it as well as having a personal source for bullets for my .41's...got the sizing dies and gas checks waiting!

[bearcove]

I think Blammer is the one we need to give credit to for this design. He was the one who pushed this boolit the first time it ran. Al ,SwedeNelson thanks for making it. I remember Blammer saying he wanted a LFT for his 41 way back when....

That makes this place what it is.

Guys like them.

Thanks, Rod

[Capt. Methane]

Indeed, thanks gentlemen-Thanks!

This one looks like it should feed in my lever gun-it's a little balky with SWCs...

[osteodoc08]

Any news on this one yet Blammer? I've got some time off and am really anxious to see how these work out.

[Blammer]

YEP! got word NOE dropped them in the mail today! should have them first thing on Monday, so by that Fri I should have everyones out to them.

[TheCelt]

GREAT news!!! Thanks Blammer!!!

[DeadWoodDan]

Alright been casting the last two days so have a good routine down and ready to knock this one out.
Thanks Blammer
DWD

[blaser.306]

YEP! got word NOE dropped them in the mail today! should have them first thing on Monday, so by that Fri I should have everyones out to them.

Sonds great Dj! With the way the USPS has been working coming north, I should have my mould by May! LOL. Thanks for all the time and effort put into this and other group buy's.

[Capt. Methane]

Oh good!

Of course I'm heading out of town for work for two weeks on Sunday...

But I'll be looking forward to seeing it when I get home!

[osteodoc08]

That's awesome news. A little too late for deer season here in N GA, but I've got plenty of time to practice! Can't wait. Thanks again!

[osteodoc08]

Have a chance to cast with them Blammer?

I love late Christmas presents! Woot Woot!

[Blammer]

JUST got them in the mail today! Plans are to get busy this weekend getting them all boxed and out. An of course cast a few...

[Capt. Methane]

Post some pics please, I won't get home to see mine till the 24th!

[Capt. Methane]

Because I got the NOE handles with my mold it is shipping directly from NOE. I got a USPS tracking notice so it should be waiting for me when I get home...got some lead on the way too, looking forward to it!

Lead, gas checks, new dies for the Star and the molds...it's gonna be good!

[Blammer]

left camera at brother house no pics! :(

[DeadWoodDan]

Blammer,
Do you have the thread discussion that started this one?
Thanks DWD

[Blammer]

No I do not.

[mold maker]

My hair and patients both got thin waiting for this one. I must be getting old.
Thanks Blammer. I'm really looking forward to it.

[Capt. Methane]

left camera at brother house no pics! :(

Oh, man...I was hoping for a little vicarious casting! Oh well, 11 days I guess...

[bearcove]

soon grasshopper

[Capt. Methane]

Well, word is that the mold is at the house waiting for me-and the lead has shown up too ("something too heavy to move is sitting on the porch" my wife advises!).

This one is going to be my first HP...

[GregP42]

Waiting with baited breath for my mold! Too bad it has decided to snow outside where I cast!

[osteodoc08]

Blammer, did you have a chance to get those mailed out?

[bearcove]

Check the list on first page, he posts when shipped

[Blammer]

updating as we speak... :)

[Blammer]

mold maker, waiting on the GC's, sorry about that.

[ratboy]

mine has arrived. thank you sir for all your work in getting this group buy done.
i now haw to wait until the weather warms enough to test it out.

[jaydub in wi]

mine has arrived. thank you sir for all your work in getting this group buy done.
i now haw to wait until the weather warms enough to test it out.
Mine arrived today too. Thanks Blammer for all of your effort on this one.

[DeadWoodDan]

Got mine today!! Thank you Blammer and NOE. We'll see if I can't get some dropped this weekend.
DWD

[Lefty SRH]

Got mine today, thank you

[RICHP]

Got mine.

[osteodoc08]

Got mine. As usual from NOE, it looks awesome. Can't wait to drop some boolits. It'll be early next month before I have a chance to try it out. I've got plenty of cleaned and deprimed brass ready to go. Gonna try it with some TrailBoss powder puff loads, 231, HS-6, 2400 and 296. Can't wait. I hope it cycles in my marlins. I can really run through some boolits in those!

[TheCelt]

No joy here, looks like tomorrow I guess!

[Capt. Methane]

Got mine. As usual from NOE, it looks awesome. Can't wait to drop some boolits. It'll be early next month before I have a chance to try it out. I've got plenty of cleaned and deprimed brass ready to go. Gonna try it with some TrailBoss powder puff loads, 231, HS-6, 2400 and 296. Can't wait. I hope it cycles in my marlins. I can really run through some boolits in those!

One of the reasons I got this mold is that it looks like it will do fine in the lever gun, we'll see...

[osteodoc08]

One of the reasons I got this mold is that it looks like it will do fine in the lever gun, we'll see...

Me too, plus I've found the LFN style to be very accurate for me. I can appreciate the Keith style, but is far from the be all end all when it comes to cast boolits.