View Full Version : Question on return bar on Lyman 4500
evil5826
02-16-2012, 02:54 PM
Any one have issues with the area circled on the picture attached.
The Bullet Knockout Link keeps scraping and missing the Push Out Rod. I had to return mine. Any one have any little alterations that may help.
Rockchucker
02-16-2012, 03:46 PM
Would it be possible to loosen up the two bolts at the top and align the bottom of the return bar with the push rod pin.Just a thought, it may or may not work.
Irascible
02-16-2012, 06:09 PM
Not on backwards is it?
Lefty SRH
02-16-2012, 10:07 PM
I didn't have that issue. Mine would push the boolit out all the way of the sizing die. I ended up welding ina small rod to make it push the boolit all the way out. Works great now.
engineer401
02-16-2012, 11:36 PM
I had to wrap a piece of smashed brass tubing around the piece you circled so the bullet could be pushed up. Frustrating, I know.
evil5826
02-17-2012, 12:15 PM
Manufacturing defect, the bullet knockout link was bowed out on the sides. Received my new one and new the difference right away.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.