Question on return bar on Lyman 4500

[evil5826]

Any one have issues with the area circled on the picture attached.
The Bullet Knockout Link keeps scraping and missing the Push Out Rod. I had to return mine. Any one have any little alterations that may help.

[Rockchucker]

Would it be possible to loosen up the two bolts at the top and align the bottom of the return bar with the push rod pin.Just a thought, it may or may not work.

[Irascible]

Not on backwards is it?

[Lefty SRH]

I didn't have that issue. Mine would push the boolit out all the way of the sizing die. I ended up welding ina small rod to make it push the boolit all the way out. Works great now.

[engineer401]

I had to wrap a piece of smashed brass tubing around the piece you circled so the bullet could be pushed up. Frustrating, I know.

[evil5826]

Manufacturing defect, the bullet knockout link was bowed out on the sides. Received my new one and new the difference right away.