Lee 310 bullet

[ubetcha]

Seeing that for some reason my search request is not working, I just recieved a new Lee 310 gr bullet mould and was trying to search for some load info.Any pro/cons on the bullet and what have people be loading with
Thanks

[ubetcha]

:bigsmyl2:Whoops I should have scrolled down a little bit more in this area.I just found some info,but anymore suggestions would be helpful

[44man]

.44 mag for a Ruger I hope.
21.5 gr of 296 and a Fed 150 primer. I use Felix lube.

[454PB]

44man's load is a good one, but this boolit works well at reduced velocities, too. Some of my loads drive it at 1100 fps. and it's still a tack driver.

[hoosierlogger]

It is not worth a hoot in my Handi Rifle. I cant get it to spin fast enough to get as good group.

[ubetcha]

Yes a Ruger NMSBH. The last loads I shot out of it were reduced 200gr cast and it was a pleasure to shoot. So to start with the 310's I would shoot reduce loads nd work up.Right now I'm thinking about getting back to gun deer hunting and use my 44
454pb,I saw you post on using blue dot in you 44 and was think about that ,AA#9,and 2400.I think I may have used 2400 in the past but don't recall. I have a T/C 10" in 44 mag too so I will be working up a load for both

[454PB]

Yes, I have settled on Bluedot as my powder for midrange loads in everything from .357 magnum through 454 Casull, but over the years I've tried about every applicable powder. I'd have to say HS-6 is in second place.

[161]

I bought that mold about a month ago for my 7.5 SRH. I push them at 1100 FPS with 2400 and get 1 in at 50 yards with a cheap scope. So far I really like the 310.