Lyman super moly spray

[45fan]

Does any one have any experience with this Lyman super moly spray lube?

http://www.cheaperthandirt.com/30813175-1.html

I see other threads about Lyman super moly lube but I am not sure it is the same stuff, I havent seen anyone talking about a spray. The spray claims it can be used in place of tumble lube and also makes a good mold release. Is this truth in advertising or a crock of you know what?

Just like to know, seems like it would be a very convenient product if it works as advertised.

[canyon-ghost]

Wow, $15!! wow.

My bullet lube, Carnuba Red costs about $2 a stick (that is at least two batches of bullets) and my case sizing lube (Alberto VO5 hairdressing gel) costs $4 and lasts for several years!

Wow, $15, wow! Are you kidding me? I got really tired of the vicious cycle of constantly ordering aerosol cans of Hornady One Shot and other sprays.

I'm really serious about what I'm using for lubes, it's the only way this poor boy reloads!

[canyon-ghost]

http://www.lsstuff.com/lube/

http://i758.photobucket.com/albums/xx228/3rdshooter/contenders/22Hornetcases005.jpg

VO 5 contains lanolin (also has a lot of parfum, it's smelly).

[375RUGER]

I only use it to condition a bore before shooting a J-word that has been moly coated. I was using Ms. Moly but I don't think its available any more, not that I can find. I use the Lyman now.
I don't use it on boolits.

[44 WCF]

Lyman was first spray moly I used. I had made some lube that seemd great but it was sticky it was horrible, more it aged the stickier it got. Of course, being as smart as I am, I sized about a 1000 bullets right off with my super wonder lube. They made a mess out of the seating die, a mess all around. So I sprayed them with the Moly and solved the sticky issue, they didn't lead the barrel at all but paper targets at 25 yards looked like they had been sprayed with an oil can. Afte that I used as release agent for stubborn moulds. I wouild spray then polish with cotton wheel in my dremel tool. I now use it in nearly all my steel moulds, but you have to polish with cotton wheel. Sure restores nice smooth finish to some moulds too.