walkswithsticks
02-05-2012, 12:38 PM
Over the years, I would get my hands of a rifle or pistol that was just the bee's knees for accuracy with the fabled jacketed bullet. Since I don't dabble in such heathen pursuits, I would immediately begin to work up suitable cast boolit loads.
The first order of business is usually to adjust or replace the sights to lower the point of impact. Bear in mind that I work well within the lower end of the power and velocity spectrum as my old shoulder and wrist do not tolerate much abuse.
I find that a heavy boolit and a fast burning powder such as Unique, Red Dot, or HP 38 in the lower 1/3 of the powder chart yields good accuracy and modest velocity in handguns. As an example, I have had the same result with Unique and Red Dot in 30/30, 300 Savage, and 38/55 in Rifles.
A recent experience with a 10" Contender barrel in 32/20 shooting 3.5gr of HP 38 behind a 115 gr RNFP of WW shot 10" high at 75 yd with the sights cranked all the way.
Why does this happen?
The first order of business is usually to adjust or replace the sights to lower the point of impact. Bear in mind that I work well within the lower end of the power and velocity spectrum as my old shoulder and wrist do not tolerate much abuse.
I find that a heavy boolit and a fast burning powder such as Unique, Red Dot, or HP 38 in the lower 1/3 of the powder chart yields good accuracy and modest velocity in handguns. As an example, I have had the same result with Unique and Red Dot in 30/30, 300 Savage, and 38/55 in Rifles.
A recent experience with a 10" Contender barrel in 32/20 shooting 3.5gr of HP 38 behind a 115 gr RNFP of WW shot 10" high at 75 yd with the sights cranked all the way.
Why does this happen?