Anyone use the Accurate Mold 43-250K?

[KevH]

Does anyone here use the Accurate Molds 43-250K?

How does it compare with other "Keith" molds out there?

Does it use a square lube groove?

[GLL]

If it is not exactly what you want Tom will tweak it to fit your needs.
You want a wider middle band just explain your requirements ! He has modified several different molds designs for me and every one of them worked well and now in his catalog.

Jerry

Accurate Molds 43-250K
http://www.fototime.com/3D2C4D346B9A38B/orig.png

http://www.fototime.com/60CB6625A6A4E33/standard.jpg

[high standard 40]

I recently received one of his 43-250J molds....basically the same mold with a gascheck added. It is without question the best performing mold I own.

In answer to your question about lube groove, below is a quote from his site.

Lube and Crimp Grooves
For bullet body features such as lube and crimp grooves, I have standardized dimensions that work well. I adjust lube width to suit bearing surface, and most customers leave crimp and lube grooves up to me. However, you can dictate those details, keeping within my tooling limits. Groove angles are no less than 35 degrees, and lube grooves cannot exceed .030” in depth.

Radius lube grooves are also available.