Need An O.A.L. For 9mm 122gr TCFP

[robotboy175]

the title says it all. i have always used the truncated cone bullets, but these are flat nosed. any help would be appreciated!

link below



9MM 122GR TC SEMI WADCUTTER Cast Bullets

http://www.wideners.com/itemdetail.cfm?item_id=8790&dir=278|281|1084|1128

[runfiverun]

i'd make a dummy and see if it chambers then,
i'd make em fit the magazine.
then see if they'll feed from it.
i'd then compare that to a known bullet and load to determine case capacity and adjust my load from that and go from there.