Log in

View Full Version : List of Lee molds?


DLCTEX
03-11-2007, 08:06 PM
I have searched and not found a listing of Lee mold numbers and the size and design. Anyone know of such? Currently I am looking for dia. of the following molds.90444.-90431.-90347.-90448.-90351. Often on Ebay the seller doesn't know anything about casting and may say the dia. is about 1/2 inch or 3/8 inch. Many of these are no longer listed by Lee. Thanks :-D DALE

90551 was a typo, it was 90351, found it on lee's site. Thanks 90444 is .457
mag_01
03-11-2007, 08:57 PM
Dale------90431 is a 10MM----TL-401-175-SWC
90347 is a 45------------452-190-SWC----I have 1 of these nice boolit
90348 is a 45------------452-200-SWC-----I also have this one


Hope this helps----Mag
454PB
03-11-2007, 09:16 PM
This should help:

http://www.leeprecision.com/cgi/catalog/browse.cgi?1136499863.3923=/html/catalog/bullmol2.html
DLCTEX
03-11-2007, 11:00 PM
I wonder if anyone has compiled a list of past and present Lee molds. Dale
Buckshot
03-11-2007, 11:22 PM
..................Never seen one if so. Possibly it's because someone who'd be interested enough to spend the time doing it refuses to recognize the fact that Lee actually does produce moulds :-)

................Buckshot
fatnhappy
03-11-2007, 11:29 PM
..................Never seen one if so. Possibly it's because someone who'd be interested enough to spend the time doing it refuses to recognize the fact that Lee actually does produce moulds :-)

................Buckshot

I'd rather see a comprehensive list of the group buy moulds this site has turned out. They serve a broad spectrum with some rather well thought out designs, unaffected by bean counters.

My $.02 fwiw
Uncle Grinch
03-11-2007, 11:51 PM
It would be a good reference to have.
376Steyr
03-12-2007, 04:45 AM
I second the motion to have a Historical Group Buy List. Maybe set it up as an "Archive" section on the Group Buy system? Or better yet have it as a separate section under "Bullet Casting". Maybe a table with bullet statistics (name, caliber, weight, type) date the group buy closed, with a link to a picture of the bullet. Then maybe a "sticky" for each mould for people to comment on the performance.

I sure am good at finding work for other folks to do! :)
Uncle Grinch
03-13-2007, 11:01 PM
I have put together a list of all the Lee moulds that I could find a reference on (189 total). My only problem is the Round Balls, I can't find their weight, but I do have the caliber.

It's an .xls (Excel) document though and I can't attach it.

Give me some help webmaster....
Bret4207
03-14-2007, 08:09 AM
I've suggested several times that a listing of the GB's be made. If someone with some computer savy would step forward he could collect the drawings or photos and a sticky could be made to group them and any info on results, loads, failures etc. We've got at least 7-8 years of GB's to catalog.
sundog
03-14-2007, 08:44 AM
Well, I started to at one time, and for what ever reason, just never got-r-done.

http://www.castpics.net/RandD/Lee_moulds/Lee_Moulds.html

btw, is there anyone who would like to take over Castpics? sundog
Uncle Grinch
03-14-2007, 09:03 AM
Well, here is a text document listing of Lee moulds. Those that I did not have numbers for are simply shown as "99999". I'm sure there are many more.

Maybe this will start this list off. Sorry, no pictures.