Load data for .40 sw 200gr lead using n 340

[Fellas]

any one use this combination please any help will be appreciated

thanks
fellas

[Ola]

Start at 4,4 grains of Vihtavuori N340. Then work it up.

The official data of VV:
http://www.lapua.com/en/products/reloading/vihtavuori-reloading-data

[Fellas]

but the official data is for only tmj 200gr not lead

thanks

[Ola]

Yes, I know. And that's why I told you to start from 4,4 grains (4,6 in VV data). That should be a safe starting load for pretty much any 200 grain bullet in .40 S&W: TMJ, FMJ, HP, Lead...

If it was me, I would use the 4,6 grains from the start. It is the starting load for a JACKETED bullet so it should be safe with a "softer" lead bullet.