41mag
01-18-2012, 09:10 PM
Between myself and my good friend we need some recommendations for a quality revolver smith.
We're both in the Houston area, and between the two of us have several cylinders which are in need of a bit of reaming. Neither of us wants to give this the home treatment.
So if you have someone in Texas, preferably, but not necessary, we sure would appreciate a heads up and possibly a website or contact info. IT can either be posted here, in a P.M. or even an email.
It just isn't going to work out with cast boolits, and these revolvers having, chamber mouths which are smaller than the bores.
Anyway thanks in advance, I know there are some folks here who know of someone who can handle this pretty efficiently.
We're both in the Houston area, and between the two of us have several cylinders which are in need of a bit of reaming. Neither of us wants to give this the home treatment.
So if you have someone in Texas, preferably, but not necessary, we sure would appreciate a heads up and possibly a website or contact info. IT can either be posted here, in a P.M. or even an email.
It just isn't going to work out with cast boolits, and these revolvers having, chamber mouths which are smaller than the bores.
Anyway thanks in advance, I know there are some folks here who know of someone who can handle this pretty efficiently.