Need Some Help...Pistolsmith...

[41mag]

Between myself and my good friend we need some recommendations for a quality revolver smith.

We're both in the Houston area, and between the two of us have several cylinders which are in need of a bit of reaming. Neither of us wants to give this the home treatment.

So if you have someone in Texas, preferably, but not necessary, we sure would appreciate a heads up and possibly a website or contact info. IT can either be posted here, in a P.M. or even an email.

It just isn't going to work out with cast boolits, and these revolvers having, chamber mouths which are smaller than the bores.

Anyway thanks in advance, I know there are some folks here who know of someone who can handle this pretty efficiently.

[stubshaft]

Send it out to;

http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&sqi=2&ved=0CCEQFjAA&url=http%3A%2F%2Fwww.cylindersmith.com%2F&ei=9JkXT_ToL-TRiAL3m4yeCA&usg=AFQjCNEsY5ONhtaFb-KrjxRHIkvgU_NGFA&sig2=55PUVbQ19Fof24NmhSwbOA

He does good work and turnaround time is more than fair.

[crabo]

Send it out to;

http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&sqi=2&ved=0CCEQFjAA&url=http%3A%2F%2Fwww.cylindersmith.com%2F&ei=9JkXT_ToL-TRiAL3m4yeCA&usg=AFQjCNEsY5ONhtaFb-KrjxRHIkvgU_NGFA&sig2=55PUVbQ19Fof24NmhSwbOA

He does good work and turnaround time is more than fair.

I agree

[Paul105]

Plus one on cylindersmith.com

As an alternative, Alan Harton is in the Houston area. He is more of a custom builder, but may do this also. Those in the know say his work is second to none.

Alan Harton: 713-772-8314 or 713-907-603, or email aharton@hotmail.com.

[41mag]

THanks fella's, especially Paul, that fellow is not far from the house at all.