Big thanks to Tom at Accurate molds

[melloairman]

I had Tom designed a .455 bullet that was very accurate in my air rifles . So I carried the design over to a .358 and .312 . which would not group past 30 yards . Talked to Tom and he offered to re-cut the molds to a larger caliber for a little more than half a new mold so the .312 is now a .358 and the .358 is now a .455 . Thanks again Tom .Marvin
http://i301.photobucket.com/albums/nn55/melloroadman/IMG_7019A.jpg
http://i301.photobucket.com/albums/nn55/melloroadman/IMG_7017A.jpg

[GLL]

Please post the results with your new 358105W !

Jerry

[geargnasher]

Did he face-off the old stamping and re-mark the moulds to indicate the new size?

Gear

[melloairman]

He did not surface the mold . He stamped over the old size so it could not be read . Then re stamped the mold with the new size . No mistake can be made with the identity of the mold . The numbers you see are the numbers that identify the mold. Marvin

[9.3X62AL]

Customer service like that is impressive. Makes me glad I just ordered 2 moulds from Accurate last week. I like seeing my hobby dollars go to good folks doing the right things.