Carnauba Red

[LAH]

http://i66.photobucket.com/albums/h244/Creekerpics/Loading%20Room%20101/Bullets/45-260-K/DSC02210.jpg

http://i66.photobucket.com/albums/h244/Creekerpics/Loading%20Room%20101/Bullets/45-260-K/DSC02211.jpg

[leadman]

Yes, that is what it looks like. LOL

[LAH]

Dresses a boolit rather nicely.

[Roundnoser]

That is a fine lookin boolit you got there!

[white eagle]

mine looks like that too

[LAH]

They are the Ballisti-Cast #1101
http://i66.photobucket.com/albums/h244/Creekerpics/Loading%20Room%20101/Bullets/45-260-K/DSC02208.jpg

http://i66.photobucket.com/albums/h244/Creekerpics/Loading%20Room%20101/Bullets/45-260-K/DSC02207.jpg

[zomby woof]

lots of green in your shop

[375RUGER]

blue and red too

[LAH]

lots of green in your shop


blue and red too

I'm equal opportunity.

[singleshot]

Dresses a boolit rather nicely.

Yes, with a pretty red dress like that, you gotta take her out and either put a plate (paper) or meat (critter) in front of her and let her dig in. ;-)

[LAH]

She can sure enough dig.

[wildphilhickup]

You got too many. Sell me sum?

[LAH]

You got too many. Sell me sum?

If your talking boolits, I got plenty. PM me if you're interested.

[cbrick]

Creeker, you gotta put an air cylinder on that Star, you'll be a changed man. The difference between the crank and air pressure is remarkble, incredible.

Rick

[LAH]

Creeker, you gotta put an air cylinder on that Star, you'll be a changed man. The difference between the crank and air pressure is remarkble, incredible.

Rick

I have one on my "Hard Lube Star". It worked great since '02 or '03, zero problems. My other two Stars are for LBT Blue & Carnauba Red & use manual pressure screws. I like the air cylinder especailly if I'm using the bullet feed with tubes because the manual crank won't turn 360 unless mods are made.

[runfiverun]

i use the air with the carnuba red it takes some oomph once you get the temp just right though it goes along right well.

[LAH]

A little note about these air feeds that I'm sure most you guys know is a little lube of some sort on the piston works wonders especially if you're using heat. This keeps the piston from wanting to stick to lube tube walls. I'm using an old old tube of Hoppe's Gun Grease for this.