.410 Shotshells : HS-6 or H110

[DODGEM250]

I've acquired about 80 410 shotshells and want to know who uses HS-6 or H110 for 410 reloads. If neither... what do you use ?

[Mk42gunner]

I know Hodgdon has a few loads on their website for the .410.

I haven't loaded any .410 for probably 30 years, but I loaded quite a few with Herco with a Lee Loader.

Robert

[turtlezx]

i use h 110 with good results in the 410

[rond]

Lil Gun works well for me.

[Dark Helmet]

2400 with the Lee Loader

[Reload3006]

HS6 would be to fast for the little 410 according to all the load data I have. H110 WW296 IMR4227 Alliant 2400, 410 and Hodgdon Lil gun..... I am sure that others have powders in the same range I have used all the above except for LIL gun and 410 I had the best luck with H110

[UNIQUEDOT]

All i ever used in .410 bore was h110.

[Tom-ADC]

Either H110 or Win 296.

[huntinmo]

Lots of 410 data on the Hodgdon website for H110.

[stubshaft]

Either H110 or Win 296.

+1 - It is what WW296 was designed for.

[Tom-ADC]

+1 - It is what WW296 was designed for.

Yep but do use it for 44 mag, 45LC and 30 carbine.

[kenyerian]

I have used 296 for years but have recently switched to Lil Gun.