Saeco 21 GC problem

[toolz568]

I have a Saeco 21 (458) mold that is too small for my Hornady gas checks. Does Saeco molds require a certain GC, or do I need to "Beagle" my mold. It's a great mold and I really want to see if I can correct this.

OG

[Ben]

You may need to send the mold ( and a few of your g/c's ) to Buckshot and have him enlarge the g/c shank so that the gas checks will fit and crimp on properly.

Ben

[Calamity Jake]

You can also try annealing the GCs it reduces spring back, if that doesn't work, a little super glue works wonders.

[toolz568]

Thanks for the great advice. I tried annealing and super glue. Super glue works great, annealing did not. I can live with super glue, but I will probably ask Buckshot to open it up a little.

Thanks,

OG