View Full Version : Saeco 21 GC problem
toolz568
12-25-2011, 03:36 AM
I have a Saeco 21 (458) mold that is too small for my Hornady gas checks. Does Saeco molds require a certain GC, or do I need to "Beagle" my mold. It's a great mold and I really want to see if I can correct this.
OG
You may need to send the mold ( and a few of your g/c's ) to Buckshot and have him enlarge the g/c shank so that the gas checks will fit and crimp on properly.
Ben
Calamity Jake
12-27-2011, 09:29 AM
You can also try annealing the GCs it reduces spring back, if that doesn't work, a little super glue works wonders.
toolz568
12-27-2011, 09:50 PM
Thanks for the great advice. I tried annealing and super glue. Super glue works great, annealing did not. I can live with super glue, but I will probably ask Buckshot to open it up a little.
Thanks,
OG
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.